BlackMark 69f089e53a pureboot 6: a build-time OSCCAL trim, applied ahead of every reset path ...

The RC-oscillator answer's device half (dev/tasks.md in libavr): OSCCAL joins
pureboot_add_loader() as one optional byte, written at the top of run() before
the WDRF bail so the watchdog hand-over inherits the corrected clock too.
Orthogonal to the backend — an autobaud build may carry it purely for the
application. No value, no code: the stock image differs from v5 in exactly
the version's two bytes (the stamp and the 'b' immediate).

Measured: +6 B where OSCCAL takes sts (328P, 404→410), +4 B in low I/O
(t85, 402→406); the tightest image in the space (1284 autobaud on USART
pins, 504) carries the sts form at 510 of 512. New gates: the OSCCAL size
points on every chip, the wire-observed trim byte on both addressing
classes (test/pbosccal.py, red-green), and the autobaud unit pinned to
ram_start (test/check_unit.cmake, red-green) — the address --info's
measured-clock read is about to rely on.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

2026-07-28 00:53:14 +02:00

1.1 KiB

Raw Blame History

View Raw