Pins move the image for exactly one reason — a bit-banged link on a USART's own
pins has to release that USART — and the matrix said outright that they were no
axis, so the tightest configuration in the space was one nothing built. Not
subtly, either: the 1284's slot ends at flash end, so that build does not merely
exceed the size test's limit, it fails to link. pureboot_{sw,autobaud}_on_usart
{0,1} are gate points in both matrix modes now, and the exhaustive sweep carries
the pins across its whole cross product. The hand-measured table is the gate's
output: 506 B of 512 for the 1284 autobaud on USART0's pins, 504 on USART1's.
pureboot.mute drives the defect itself — an application hands over with USART0
still enabled and the loader on those pins must still answer. Reaching that
needed the runner to know an enabled USART owns its TxD, which simavr does not
model at all: it wires a USART through IRQs and never takes the pin from the
port. It also brings UCSRnB up with TXEN already set where silicon clears the
register, so the runner restores the reset value for the USART it models — the
mute must come from the application, not from power-on. The fixture stays
silent, since nothing is listening on the USART it brings up.
test_handshake.py, written where no gate could run it, is pureboot.handshake.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The word-addressed 1284s were the one family deploying in a 1 KiB slot,
because the far-flash machinery (ELPM reads, RAMPZ page commands, a
word-addressed wire) did not fit 512 B. It does now: 478 B stock, 494 B in
the heaviest configuration the build can produce. They take the 644s'
geometry, where the smallest boot section holds the resident slot and its
staging slot together. The loader's version goes to 3; the host tool did
not change, so its own version stays 2 and only the window it speaks
widens.
Most of the saving is one restructure. The info block and a flash read are
the same act, so giving all four streamed commands one address-and-count
path leaves exactly one call site for the flash streamer: it inlines into
the never-returning command loop and its 24-bit cursor stops being saved
and restored around every transmit. Around it, the ack byte moved out of
line, the wire's byte pair is bit_cast into the word it already is, the
fuse loop ends on its count, the info block's in-slot offset is taken as
the one-byte relocation it is, and -fno-expensive-optimizations gives way
to -fno-move-loop-invariants -fno-tree-ter. Every chip shrank 14-18 B.
The size matrix grew the axes it was missing: the USART1 instance across
the whole clock ladder, and the shape a slow baud gives a software UART —
past 255 delay iterations libavr takes the 16-bit delay loop, which the
ladder default never selects and which was 4 B over the 1284's slot the
first time it was built.
The protocol fixture stopped deriving the loader entry from the flash
size; on the 1284s it had been jumping a slot low and reaching the loader
only because erased flash walked it up.
Docs and comments were consolidated across the port in the same pass: the
README carries a per-chip size table instead of prose, and prose that
restated the code is gone — 190 lines, no behaviour with it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The temporary page buffer is write-once per word, so a page filled over
one an earlier writer left dirty programs the stale words. The same
datasheet clause carries the cure: the buffer auto-erases after a page
write (§26.2.1; §19.2 on the tinies), so the corruption clears itself by
happening, and rewriting the page programs correctly.
The loader therefore clears the buffer nowhere. The tinies' CTPB and the
m48s' RWWSRE discard are gone; the boot-sectioned megas keep only the
trailing RWWSRE they need anyway to re-enable the RWW section for
read-back, which discards the buffer as a side effect and keeps them off
the path entirely. 434 B on the tiny13s, 438-442 on the tiny25/45/85,
430 on the m48s; the megas are unchanged, the 1284s still 506.
The host takes over the guarantee: a flash page that reads back wrong is
rewritten up to RETRIES times before the run stops. Both read-back paths
repair — verify_pages for programming, and write_differing, which is the
loader-update path where a page left wrong is a half-written loader slot.
That one is not hypothetical: deleting the discard made attiny85
pureboot.rehome fail deterministically there, the only flow still
assuming the old contract.
Protocol-visible, so README's W command says it: one W may program the
wrong bytes after a refused page, or after an application that
self-programmed entered without a reset, and a host that programs without
reading back cannot trust it.
Tests: pureboot.dirty drives the case the loader declines to guard — the
fixture application dirties every buffer word and jumps in with no reset
(hardware forbids that on a boot-sectioned mega, but simavr dispatches SPM
from anywhere, which is what makes it constructible) — and asserts a bare
verify sees the corruption, the repairing verify fixes it in one rewrite,
and it stays fixed. pbreloc asserts the same shape after a refusal.
test_planner covers the bound against a fake device: one bad write
repaired in a single rewrite, a page that never comes good stopping after
exactly three.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Clock, baud, serial backend (hardware USART 0/1 or the software UART on
any pins) and the activation window all resolve through one CMake
function, pureboot_add_loader() in pureboot/CMakeLists.txt — the unit a
downstream project consumes. The default baud is the fastest standard
rate within 2.5 % (the same best-divisor search libavr's solver runs),
gated on software builds by the polled receiver's 100-cycles-a-bit
floor; every explicit pick is re-checked by the compile's static asserts.
The size matrix builds each axis that can move the image — backend x
clock ladder x USART instance, per chip — against the slot budget, and
two nondefault deployments run the whole protocol suite live: the 328P
on its shipped 1 MHz fuses over software serial on TX=PB1/RX=PB5
(pureboot.custom), and the 644A over USART1 (pureboot.usart1). The sim
runner takes -l to bridge any link, paces a fully quiet bridge toward
real time (a free-running 8 M-cycle window loses the reset-race knock),
and the fixture application speaks the deployment it is built for.
The loader itself shed bytes on the way: the return-address high byte
spelled through byteswap (the double swap folds to the one-byte pick),
the info-block address composed instead of bit_cast, and libavr's new
polled-UART helpers replacing the port's uart::detail reaches. Every
combination fits: 458-506 B across the megas' whole matrix, 470-484 B
on the tinies, 556-562 B in the 1284s' 1 KiB slot.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The chip table becomes family blocks covering all 37 targets. The m48s
are a new deployment class: no boot section, so the tiny profile spoken
over the hardware USART — host-patched reset vector, trampoline
hand-over, a 510-byte budget (474 B built), no fuse preflight — while
their RWWSRE store stays the buffer discard (Atmel-8271 §26.2); the
device keys the patch flag and the CPU-halt waits on the curated
boot-section capability and the discard on the RWWSRE bit itself. The
644s' 64 KiB is exactly the 16-bit byte space: plain LPM, byte wire
addresses, 498 B in a 512-byte slot — and their 1 KiB minimum boot
section holds the resident and staging slots together, so self-update
needs no fuse step (the update test's slot pick now keys word-flash on
base >= 64 KiB; base + slot merely touching the boundary stays
byte-addressed). The 1284 joins the 1284P's word-addressed 1 KiB slot at
558 B. BOOT_FUSE gains every boot-sectioned family's ladder and fuse
byte; the planner exercises them all. The sim scaffolding keys
patch-vector-ness instead of the atmega name prefix, the fixture app
picks its clock by family (the tiny25/45/13 builds surfaced the 16 MHz
fallthrough as garbled banners), and the runner's wrapped flash ioctl
performs the m48 discard simavr's no-RWW cores turn into a stray buffer
fill. Sizes across the fleet: 466-504 B megas, 474 B m48s, 498 B 644s,
488-502 B tinies, 558 B 1284s — every chip passing
size/pi/planner/protocol/reloc/update.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The far machinery (ELPM reads, RAMPZ page commands, wire-word math)
costs ~46 B over the m328P's 504, and the tsb-calibrated C++-to-asm
gap says no implementation of this feature set reaches 512 on this
chip — a boundary its hardware does not have anyway: the 1284P's
smallest boot sector is 1 KiB. The slot therefore becomes
per-geometry (512 B, or 1 KiB past 64 KiB), which the host derives
from the word-addressing flag; slot arithmetic unifies (the index is
the wire high byte with its low bit dropped in either unit), the
update preflight demands a two-slot boot section in the chip's own
terms, and pbapp's hand-back jumps to the real slot base. libavr's
far primitives split their RAMPZ/Z asm operands (a page never
crosses 64 KiB, so callers keep a byte and a 16-bit cursor — the
32-bit address folds away; flash_load_far's byte form becomes the
out-RAMPZ+elpm pair avr-libc's pgm_read_byte_far rebuilds per call),
and the host splits reads at 64 KiB boundaries. All ten chips pass
the full suite — the 1284P at 558 B including protocol, relocation,
and the power-fail self-update — with pureboot byte-identical across
generated and reflect modes everywhere, and the original three
chips' images unchanged to the byte (488/502/504).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Device: boot-section detection probes SPMCR beside SPMCSR, the link
picks any hardware USART through the instance-aware lookups (URSEL
chips included), WDRF reads MCUSR-or-MCUCSR, and the >64 KiB shape
lands — word-addressed wire flash (info flag bit 1, page byte 0 means
256, base as a word address), far reads through flash_load_far, a
single 32-bit byte-cursor page walk (the 256-byte page wraps its low
byte exactly), and slot arithmetic in words (the return address
already is one). Host: addresses stay bytes internally and scale at
the wire, the boot-fuse decode becomes a per-signature table (byte
index + BOOTSZ ladder — the m168A's lives in EXTENDED), and the
planner tests pin every chip's ladder plus the word-addressed info
decode. Tests: the device runner serves every mega over the USART pty,
pbapp banners over the right link, the update rehearsal synthesizes
its assumed fuses from the tool's own table, and the PI lint tracks
the renamed info symbol. All six classic-mega/168A targets pass the
full suite (size, PI, planner, protocol, reloc, self-update) at
466–504 B; the 1284P builds await a libavr far-path slimming to make
its 512.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
check_pi.py asserts the two link-time facts position independence rests on
(no absolute jmp/call; the info block within the image's first 256 bytes);
the size gates drop to 510 on the tinies for the trampoline word.
New per-chip tests beside the reworked protocol test: the planner units
(programming orders and their recovery properties, the surgery, staging
composition, boot-fuse decode, and the update preflight's error/warning
matrix over synthetic fuse bytes), the relocated-copy sweep (the identical
image installed one slot lower serves the full command set — the PI
acceptance test, and the one that caught the temporary-buffer trap), and
the self-update end-to-end: --update-loader to a re-timed build
(pureboot9, byte-different by PUREBOOT_TIMEOUT alone), then every
power-fail phase killed mid-write, restarted from the runner's flash dump,
and completed by a re-run with the application intact throughout. The mega
rounds run the BOOTRST-unprogrammed profile: the fixture application's 'L'
jump is the application-owned loader entry that profile relies on.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
pureboot.py (Python stdlib only): images as raw binary or Intel HEX,
flash and EEPROM programming with read-back verify, erase composites,
fuse and info readout, activation-timeout configuration, and the
tinies' reset-vector surgery — the trampoline word below the loader,
page 0 written last.
The test spawns a simavr device (pureboot_device.c) — the mega's USART
as a pty; on the tinies a cycle-timed GPIO<->pty bridge for the polled
software UART plus the NVM module simavr's tiny cores lack (their SPM
opcode ioctls into a void and silently does nothing) — and drives it
with the real tool: knock from reset (erased-flash walk on the tinies),
program and verify both memories, timeout write, session reconnect, an
external reset through the patched vector, hand-over, and the fixture
application's banner. Results are cross-checked against ground-truth
memory dumps and an independent decode of the surgery's rjmp words,
red-verified against a sabotaged encoder.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
