The pin crosses libavr's phase 6 - the renamed system surface, the named
serial configs, the receiver-tolerance table, the paged SPM receipts -
and every loader image comes out size-identical: the full matrix on six
representative chips (the exhaustive cross product on three of them),
the stock and autobaud columns untouched, the four tsb tiers back on
their recorded floors at 510/526/638/836.
Byte parity was not free, and the two libavr defects it surfaced were
fixed there rather than absorbed here. The EEPROM write procedure's
step 2 - the SPMEN spin - had landed unconditionally and cost every
build six bytes for a wait a polled loader can never take; it is scoped
now, and the loaders state the datasheet's own omission clause
(spm_interlock::omitted, DS40002061B 8.6.3). The blocking page
erase/write grew an internal wait the tiers' settle() already provides,
so the tiers issue the command form and pureboot keeps its host-driven
sp_spm path.
What the port states rather than inherits: the stock 115200 at 16 MHz
sits +2.1 % past the receiver-tolerance table libavr now holds rates
to, so the hardware links say .allow_baud_error = true - the same
2.5 % envelope pureboot_baud_feasible() has always enforced, proven on
silicon across the fleet. rx_ready() reads readable() now.
Alongside the pin: rule 33's ASCII sweep over every source (docs keep
their typography), rule 34's InsertBraces in .clang-format with the
tree reformatted, std::array over the simavr runners' raw buffers, and
the stale Studio size in ide/README.md replaced by the claim its
check-flags gate actually holds.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The fixed-baud window counted down a uint32 where almost every window fits
24 bits; the countdown now takes avr::uint24_t when the poll budget allows
(the autobaud budget's own choice), uint32 past 16.7M polls — four bytes
off every fixed-baud image on every chip, the full suites green on the
changed window. The README size table is refreshed — its autobaud column
had also gone stale by the no-assembly pass's measurement-loop win, which
nothing gated: sizes.py check-readme now runs as the gate's final stage,
where every tree is freshly built and the table can actually be held.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The pin the whole history now encodes becomes the primary route: the
submodule default replaces FetchContent and the unpinned forge fallback,
LIBAVR_ROOT stays as the tandem-development override, the presets already
take the toolchain file from the submodule, and the Studio projects anchor
their include path there — correct by construction. The version tags and
the one-command historical build are documented beside the version map.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every plausible oscillator against every rate it reaches against every
backend, on one chip per size-bearing class, under --full only. The baud
ladder becomes a reachability predicate the enumeration filters on, so an
unreachable point drops out instead of aborting the configure.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
tools/make_presets.py emits the uniform pipeline the hand-grown file had
drifted from — generated configure/build/test presets and workflows for
all 37 chips, reflect configure/build for libavr's 12-chip spot set —
and tools/check.sh runs every chip's workflow (--full adds the reflect
spot) as the port's gate.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
