Persist audio overrides keyed by game image name (coop_audio_overrides.ini
next to the exe) so a known-bad game is auto-corrected on its next launch:
on attach to a guessed stream the host applies any saved override, and a
manual Override now saves too. A format the hook catches exactly at
IAudioClient::Initialize is auto-saved as that game's override (ground truth);
if it overwrites a differing stored value, a warning is logged. Host-originated
log lines now reach the Log window via IpcServer::host_log (color-coded).
Validated live (harness): a pre-seeded override for coop_tone is auto-applied
over the guess (state -> manual override, 48000/2/16). audio_overrides_test
covers persist/reload/case-insensitive lookup/differing-overwrite. Trim README.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Harden the guessed-stream sample-rate measurement that produced wrong rates
(e.g. 44100 read as ~46205). New rate_estimator.hpp measures over longer
~0.5 s windows, rejects any window that doesn't snap to a standard rate
(standard rates are >8% apart, so a quantization/burst error big enough to
miss one lands in no-man's-land, never on a wrong neighbour), and requires
consensus across windows before committing. If consensus isn't reached it
commits a low-confidence estimate (new AudioFormat_LowConfidence, shown red)
rather than spinning or publishing garbage. Pure logic, unit-tested with
adversarial cadences (rate_estimator_test) incl. the real 46205 bug value.
Add log severity levels: hook logw/loge set LogRecord.level; the host Log
window colors warnings amber and errors red. The low-confidence rate logs a
warning. Protocol -> v15 (new format states); also reserves AudioFormat_Override.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hooked audio mirroring played back pitch-shifted on games we inject into
that render at a non-device sample rate (e.g. Godot/Brotato render 44100 Hz
on a 48000 Hz endpoint via WASAPI AUTOCONVERTPCM). We attach to an
already-running game, so the render-hook never saw its IAudioClient::
Initialize and assumed the device mix format -- right channels/bits, wrong
rate -- so 44100 audio was rendered as 48000 (+~1.5 semitones).
Fix: treat a pre-existing client's format as a guess and measure its true
sample rate from the render cadence (frames/sec over a steady-state window,
snapped to the nearest standard rate) before publishing it, deferring
capture until verified. Discard the first measurement window so the
buffer-fill burst at attach time doesn't over-count. Streams created after
we inject still carry their exact Initialize format.
Channels/bit-depth genuinely can't be recovered for a pre-existing client:
AUTOCONVERTPCM hands GetBuffer a fixed staging buffer (no buffer stride to
measure -- confirmed empirically) and WASAPI exposes no API for the format.
They stay the device-mix guess, which is correct for the common case
(engines render stereo float, matching the endpoint). To keep a wrong guess
safe, a VirtualQuery clamp stops the capture copy from ever over-reading the
source buffer when the guessed bytes/frame is too large.
Surface all of this: a per-stream AudioFormatState (known / measuring /
measured rate (ch/bits assumed)) in HookStatus, shown in the Audio panel for
the hooked path and as "device endpoint (known)" for loopback; clear hook
logs; and enriched mirror status strings. Documented in README (Limitations
+ Lessons learned). The loopback fallback was always correct (post-mix at
the device format).
Tests: extract a shared, configurable ToneSource (used by coop_tone and the
hook self-test); coop_tone takes rate/channels/bits/format args. Rewrite
audio_hook_test to a format matrix x both code paths -- see-init (exact) and
guess (rate measured) -- plus a byte-incompatible guess that asserts the
clamp keeps capture safe. The matrix caught the attach-burst over-count.
audio_loopback_test now spawns coop_tone at several source formats to
confirm loopback is format-agnostic. 11/11 x64 + 3/3 x86 pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Games with several concurrent WASAPI render streams (e.g. Spider-Man: Miles
Morales) only had their first ("primary") stream mirrored; the rest kept playing
locally and never reached the guest. Now the render-hook captures + silences EVERY
tracked stream into its own ring (coop_audio_<pid>[_<index>]), each published with
that stream's own detected format (Initialize when caught, else GetMixFormat -- the
per-stream format detection, now actually used per ring rather than only for the
primary). The host creates a ring per stream and mixes the same-format streams with
a soft clip (host/src/audio/audio_mix.hpp); streams whose format differs from the
primary are still silenced (no echo) but skipped from the mix (would need
resampling).
The single-stream case is byte-for-byte unchanged: when only one stream is active
the host passes it through without the mixer, so the common path has no overhead or
fidelity change.
Verified: new audio_mix_test covers the decode/sum/soft-clip/encode math (float32 +
int16); audio_hook_test (x64 + x86) still passes, guarding the primary
capture+silence path against regression; full build x64 + x86 clean; ctest x64
11/11, x86 3/3. Multi-stream mixing against a real multi-stream game needs a live
session to fully confirm.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
D3D12 games (e.g. Spider-Man: Miles Morales) fire the Present hook -- the DXGI
swapchain's Present is the same vtable function for D3D11 and D3D12 -- but
GetBuffer(0) as ID3D11Texture2D fails, so the hook used to idle. Now, when the D3D11
GetBuffer fails, present_hook bridges via D3D11On12: it gets the game's ID3D12Device
from the backbuffer, creates its own DIRECT command queue on it (no need to hook the
game's ExecuteCommandLists), builds an ID3D11On12Device, CreateWrappedResource's the
D3D12 backbuffer, and CopyResource's it into the existing shared keyed-mutex texture
-- so the host side is unchanged. The bridge is created lazily and torn down with the
hook.
Verified with a new in-process dx12_present_hook_test: it drives a real D3D12
swapchain (clears a backbuffer, Presents) and asserts present fired, the backbuffer
was bridged into the shared texture, and a second device reads the exact color back
by name -- {51,102,153,255}. Full build x64 + x86 clean (the x86 hook compiles the
D3D12 path too); ctest x64 10/10, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The FPS readout only measured the host's own render rate, hiding capture stutter.
The Video panel now shows a "Pipeline rates" section:
- Tool render (host FPS / frametime, as before);
- hooked source: Game present (/s, from VideoShare.present_calls deltas), Hook
publish (/s, generation deltas), and capture->display latency avg/min/max ms;
- WGC source: WGC capture (/s) from a new WindowCapture frame-arrival counter
(game present + latency are n/a, since WGC frames aren't game-timestamped).
Latency uses a system-wide clock: protocol v11->v12 adds VideoShare.present_qpc,
stamped by the hook at publish (publish_video_frame); the host measures
now_qpc - present_qpc per newly published frame, windowed to min/avg/max each second.
Verified: present_hook_test (x64 + x86) now asserts present_qpc is stamped; full
build x64 + x86 clean; ctest x64 9/9, x86 3/3. The live rate/latency numbers need a
real game mirroring to read meaningfully; wiring validated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Makes it possible to isolate an input->tool problem from a tool->game one in the
Controllers panel (under Debug details):
- which backend fed each slot is already shown via the per-pad source tag
("XInput #0" / "Steam Input") in the Incoming section;
- a new "Round-trip" table shows, per slot, the state we forwarded (the active
backend's pad) next to what the game actually read back, highlighting matches.
For the round-trip, the XInput hook now echoes the state it returns to the game into
the status (protocol v9->v10: per-slot read_state in HookStatus).
Verified: hook_selftest (x64 + x86) asserts the hook records the game-read state;
full build x64 + x86 clean; ctest x64 9/9, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The XInput hook used to swallow XInputSetState; now it records the requested
left/right motor speeds into the status back-channel (protocol v8->v9: per-slot
rumble_left/right in HookStatus). Each frame the host reads them and, only on
change, drives the guest's actuator via the active backend:
- XInput: XInputSetState on the guest's slot (the open question is whether Steam's
RPT virtual pad accepts vibration and routes it to the guest -- needs live RPT);
- Steam Input: SteamInput TriggerVibration on the slot's controller handle, with the
XInput fallback for slots Steam isn't driving.
InputSource gains a set_rumble(slot,left,right) hook (default no-op) implemented by
both backends; SteamInputSource now tracks per-slot controller handles + which slots
it drives.
Verified: hook_selftest (x64 + x86) now asserts the hook records the rumble from
XInputSetState into the status; full build x64 + x86 clean; ctest x64 9/9, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Forward the host window's clicks and keystrokes into the injected game so guests
can drive menus / "Press Start" / text entry that a pad can't.
Protocol (v7->v8): new HookSubsys_Mkb and an SPSC MkbRing of MkbEvents in
SharedBlock (host produces, hook consumes); push/pop helpers.
Hook (hook/src/mkb_hook.cpp, new subsystem): a worker-loop pump drains the ring at
~5 ms and PostMessageW's the matching window messages (WM_KEY*/WM_CHAR, mouse
buttons, WM_MOUSEWHEEL) to the game's main window; it also inline-hooks user32
GetAsyncKeyState / GetKeyboardState / GetCursorPos (stdcall trampolines per the x86
rule) to report a synthesized state so polling games react too. Removing the
subsystem clears all synthesized keys (no stuck input).
Host: the Injection panel gets a "Mouse + keyboard forwarding" subsystem toggle
(opt-in, default off -- the toggle is the hook). host/src/inject/mkb_forward.cpp
reads ImGui IO each frame and forwards only when the host window is focused and
ImGui isn't capturing the event; keyboard always, mouse only while mirroring (clicks
+ wheel, not movement). Mouse coords are mapped through the letterbox to game-client
space (host/src/inject/mkb_map.hpp), accounting for WGC-of-decorated-window vs
hooked/borderless. RawInput/DirectInput games are out of scope for this version.
Verified: new mkb_ring_test + mkb_map_test pass; full build x64 + x86 clean; ctest
x64 9/9 and x86 3/3 green (no regression from the protocol bump). The subsystem is
opt-in, so it can't affect existing behavior unless enabled; the end-to-end
click-into-game path needs live Remote Play + a real game to confirm.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Only the shipping artifacts (coop_host.exe, coop_hook.dll, coop_hook_x86.dll,
coop_inject_x86.exe, steam_api64.dll, steam_input_actions.vdf) now land in the
bin/<config>/ root, so it can be copied wholesale into a donor game folder. Test
exes (plus the coop_tone fixture) build into bin/<config>/tests/ and the dev probes
into bin/<config>/tools/, via a new coop_output_subdir() CMake helper.
The probes resolve coop_hook.dll / the x86 injector from the deployable root one
level up (new common/coop/tool_paths.hpp: deployed_artifact_path checks next-to-exe
then parent). coop_tone is co-located with the tests so audio_loopback_test's
"spawn coop_tone.exe next to me" lookup is unchanged.
Verified from a clean bin/: root holds only deployables; ctest x64 7/7 and x86 3/3
green (incl. audio_loopback_test driving coop_tone from tests/).
Also convert the roadmap Planned list to bullets and drop this (now-done) item.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SafetyHook's InlineHook::call() invokes the trampoline through a __cdecl
pointer (the compiler default on x86). The functions we hook are __stdcall
(IDXGISwapChain::Present/Present1, the WASAPI render interfaces, and the
WINAPI SwapBuffers/wglSwapBuffers), so on 32-bit both sides cleaned the
stack -> ESP imbalance -> Run-Time Check Failure #0 and an instant crash.
On x64 every convention collapses to one, so it only bit 32-bit games:
Slaps and Beans (Unity/Rewired, 32-bit D3D11) froze the moment the Present
hook ran. The user's "crashes as soon as a button is pressed" was the
Present, not the button.
Switch every __stdcall trampoline call to SafetyHook's stdcall() (a no-op
on x64). The XInput/focus hooks were unaffected because they never call
the trampoline -- they return synthesized data.
Reproduction + regression coverage:
- tools/input_probe (coop_input_probe): injects, reports a connected pad,
toggles a button, and takes a disable_mask to bisect which subsystem
affects a game. Isolated the freeze to the video subsystem live.
- hook_selftest_x86 + present_hook_test_x86: the x86 sub-build now builds
and runs these (the x64 present_hook_test can't see a one-convention
bug). present_hook_test_x86 drives a real swapchain through the
trampoline -- it would hit RTC #0 before this fix.
- hook_selftest strengthened to exercise every loaded xinput DLL's full
export set (GetState, ordinal-100 GetStateEx, GetCapabilities, rumble
SetState) and to dump the SharedBlock layout.
- protocol.hpp: static_asserts lock the cross-bitness front-of-block
offsets (verified byte-identical on x86 and x64).
README roadmap trimmed (this milestone done) and a lessons-learned note
added on the call()/stdcall() convention trap.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Present hook never fired in Phantom Brave because it's an OpenGL game
(OPENGL32.dll loaded, IDXGISwapChain::Present calls=0), so the hooked video source
showed no image. Add an OpenGL producer under the video subsystem: inline-hook
gdi32!SwapBuffers + opengl32!wglSwapBuffers (with a re-entrancy guard, since
SwapBuffers calls wglSwapBuffers), glReadPixels the backbuffer, flip it, and upload
it into the same shared keyed-mutex texture the host already samples -- so the host
is unchanged. DXGI games still hit the Present hook; both producers are installed
and whichever the game uses fills the texture.
Validated by opengl_hook_test (real GL context, clears to a known color, reads the
exact pixels back through the shared texture) and against Phantom Brave (SwapBuffers
~75/s, present=0, shared texture 1920x1080, generation advancing). Vulkan
(vkQueuePresentKHR) still needs WGC -- documented. All 7 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The host sampled the shared backbuffer copy through a view typed exactly like the
game's backbuffer. For games whose backbuffer is an *_SRGB format (e.g. Life is
Strange: Before the Storm -- confirmed R8G8B8A8_UNORM_SRGB / fmt 29 via the hook
log), the GPU decoded sRGB->linear on the sample, and the host then wrote those
linear values straight to its plain-UNORM swapchain with no re-encode, so the
mirror came out noticeably darker than the game.
Sample the copy as the plain-UNORM sibling of the format (srgb_to_unorm) so the
bytes pass through unchanged -- matching what WGC already does. The UNORM and
*_SRGB formats share a typeless group, so CopyResource from the producer's sRGB
texture into the host's UNORM copy is allowed. Non-sRGB formats are unaffected.
Adds srgb_format_test locking the mapping. All 6 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add an injected IDXGISwapChain::Present / Present1 hook as a lower-latency,
border-free alternative to WGC. The hook copies the swapchain backbuffer into a
shared keyed-mutex texture (coop_video_<pid>); the host opens it by name and
samples it. New opt-in HookSubsys_Video (protocol v6 -> v7); the Video mirror
panel gains a WGC vs Hooked source toggle that installs/removes the subsystem.
Verified by present_hook_test (drives a real D3D11 swapchain end-to-end and reads
the rendered pixels back through the shared texture) and against Phantom Brave
(D3D9: hook installs cleanly and stays idle, WGC fallback). All 5 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a process-wide hook registry (hook/src/hook_registry) that every hook
module registers its hooks with and bumps a counter from each detour. The
XInput, focus-spoof, and audio render-hooks now register their individual
hooks (XInputGetState/Ex/Caps/SetState; GetForegroundWindow/GetActiveWindow/
GetFocus/WndProc guard; IMMDevice::Activate, IAudioClient::Initialize/
GetService, IAudioRenderClient::GetBuffer/ReleaseBuffer) and count calls.
The worker publishes the table to the host each tick over a new HookStatus
field (protocol v4 -> v5: HookEntry[] + count). The Injection panel shows it
as a collapsible table grouped by subsystem with an installed flag and call
count per hook; coop_audio_probe prints the same table headless.
Verified against Phantom Brave: 13 hooks listed with live counts (focus APIs
polled heavily, GetBuffer/ReleaseBuffer ticking with the audio render loop).
All four tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The render-hook only installed IAudioClient/IAudioRenderClient hooks
reactively, when it saw the game call IMMDevice::Activate -> GetService.
But we attach to a game that is already running and playing audio, so its
render client was created before injection: those calls never fire again,
no primary stream is ever registered, nothing is captured, and the host
always falls back to process loopback (the echo). Every game tested did so.
Fix: at anchor time, build our own probe IAudioClient + IAudioRenderClient
with raw calls and hook GetBuffer/ReleaseBuffer (plus Initialize/GetService)
on their vtables. Every instance of a COM coclass shares one vtable, so this
patches the shared vtables and intercepts the game's pre-existing render
client too. The first render client seen actively releasing buffers is
adopted as primary on the audio thread (try-lock, one-time) using the device
mix format as its assumed format (we never saw its Initialize). Streams
created after injection still register via the reactive path with their real
format.
Also fixes a self-deadlock: installing the Activate hook before the probe's
own device->Activate call re-entered hk_Activate -> install_audioclient_hooks,
which blocked on the setup mutex the installer already held, freezing the
worker (and any game thread that later called Activate -> crash). The probe
objects are now created raw, before any hook is installed.
Validated against Phantom Brave (injected while already playing): the
pre-existing 48 kHz/2ch/float render client is detected and registered as
primary, real non-silent audio reaches the ring (peak tracks the game's
levels), and a draining consumer sees zero overruns.
Tooling for iterating on real games without Steam/RPT/the host UI:
- tools/audio_probe: creates the IPC block + audio ring, injects the hook,
drains the ring and prints stream/format/peak/overrun diagnostics by pid.
- hook/src/debug_log: opt-in file trace (%TEMP%\coop_hook.log), enabled by
the COOP_HOOK_LOG env var or the %TEMP%\coop_hook.log.on sentinel the probe
drops; off in normal use.
All four tests still pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Implements the WASAPI render-hook (hook/src/audio_hook.{hpp,cpp}) and an
in-process self-test that proves COM vtable discovery and GetBuffer/ReleaseBuffer
interception with no game and no second Steam account.
- audio_hook.cpp: anchors on IMMDevice::Activate (idx 3) off our own default
endpoint (shared vtable), then hooks IAudioClient::Initialize (3) /
GetService (14) and IAudioRenderClient::GetBuffer (3) / ReleaseBuffer (4) off
live game pointers. Copies primary-stream frames into the audio ring and
releases with AUDCLNT_BUFFERFLAGS_SILENT (+ memset belt-and-suspenders), only
while the host-owned capture_enabled flag is set. Stream counting runs always;
on a ring overrun it keeps playing locally rather than going silent.
- ipc_client.hpp: publish_audio_stream / note_audio_frames /
set_audio_streams_seen write the render-stream debug fields into HookStatus.
- tests/audio_hook_test.cpp: installs the hooks, renders a tone through WASAPI
in-process, and asserts exactly one stream, frames pushed to the ring, the
ring carries the non-silent tone, and the primary was silenced. PASS:
streams_seen=1, frames_captured=32640.
- plan doc: correct GetService vtable index 13 -> 14 (SetEventHandle is 13).
coop_hook DLL wiring + host consumer/fallback come next (M3).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
First milestone of the injection render-hook audio path (see
docs/audio-render-hook-plan.md) that fixes the local audio echo without a
virtual device.
- common/include/coop/audio_ring.hpp: new lock-free SPSC shared-memory ring
for PCM, separate from the input/status SharedBlock. Free-running 64-bit
positions (release/acquire), format handshake, host-owned capture_enabled
gate, drop-whole-packet overrun policy.
- common/include/coop/protocol.hpp: add AudioStreamInfo + audio_streams_seen /
audio_streams[] to the always-present HookStatus for the render-stream-count
debug view; bump kProtocolVersion 3->4 (new members appended).
- tests/audio_ring_test.cpp: in-process unit test (push/pop integrity,
wrap-around, format handshake, overrun/drop). No hook or audio device.
- docs/audio-render-hook-plan.md: the green-lit design this implements.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mirror the real game's audio so Steam Remote Play Together (which streams the
host's own audio session) carries it to the guest. The host captures the game
by PID via WASAPI process loopback and re-renders it on the default endpoint;
the game still plays locally too (accepted "double audio" for now).
- ProcessLoopbackCapture: process-loopback capture client, frame-sink + stats.
The completion handler must be agile (IAgileObject) or
ActivateAudioInterfaceAsync rejects every call with E_ILLEGAL_METHOD_CALL.
- AudioMirror: wraps capture with an event-driven render client and a primed
ring buffer; AudioPanel drives it from the injected game's window/PID.
- coop_tone: standalone WASAPI sine-wave process used as a known audio source.
- audio_loopback_test (CTest): captures coop_tone by PID and asserts non-silent
audio arrives, so the path is verifiable without a second Steam account.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Surfaced by a game (Life is Strange: Before the Storm) that ignores
controller input when it lacks true OS focus even though it still polls
XInput. To find the focus-gated detection path, instrument the hook.
Protocol v3 status back-channel now reports:
- per-slot XInputGetState and XInputGetCapabilities counters (replacing the
single aggregate), so the overlay shows exactly which slots the game polls
and how fast;
- focus-API call counts (GetForegroundWindow/GetActiveWindow/GetFocus) to see
whether the game consults the APIs we spoof;
- input-path diagnostics: whether the process registered Raw Input for a
gamepad usage and whether it set RIDEV_INPUTSINK (background delivery), and
whether a DirectInput dll is loaded.
Host overlay gains a per-slot poll table and an "Input path" section. The DLL
refreshes input diagnostics each worker tick via GetRegisteredRawInputDevices.
hook_selftest updated for per-slot counters; passes.
This is diagnostic-only: once a real run shows which path LiS uses, the
targeted focus fix (e.g. forcing RIDEV_INPUTSINK or DI background coop) follows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two problems surfaced in testing: (1) no way to tell whether the injected
hook was actually the input source, and (2) the final design needs the tool
window focused for Steam RPT capture, which would pause/silence games that
react to focus loss. Both are addressed here.
- Focus spoofing (hook/focus_spoof): find the game's main window, subclass it
to rewrite/swallow WM_ACTIVATE/ACTIVATEAPP/NCACTIVATE/KILLFOCUS, and inline-
hook GetForegroundWindow/GetActiveWindow/GetFocus to always report the game
as active. The game keeps running and polling while unfocused.
- Status back-channel (protocol v2): the DLL reports attached/focus-spoof
flags, game pid/hwnd, a heartbeat, and a cumulative XInputGetState counter.
The host overlay turns the counter into a live poll rate, so "is the hook
working" is directly observable.
- Synthetic test-input toggle in the host: forwards a known automated pattern
(stick circle + periodic A) to prove forwarding independent of the physical
pad.
- hook_selftest extended to assert the status channel; passes.
Documented the windowed/borderless requirement and the new observable test
flow in the README.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The host can now inject coop_hook.dll into a running game and forward
controller state to it over shared memory, so the game reads the host's
(eventually the guest's) input and nothing else.
- hook/: coop_hook.dll. DllMain spawns a worker that opens the shared-memory
channel (named by the game's pid) and installs SafetyHook inline hooks on
XInputGetState/GetStateEx/GetCapabilities/SetState. Detours synthesize state
from shared memory; unmanaged slots report disconnected, hiding physical pads.
- host/: process picker (Toolhelp32), CreateRemoteThread(LoadLibraryW) injector
with an IsWow64Process2 bitness guard, IPC server publishing pads each frame,
and an ImGui Injection panel wiring it together.
- tests/: hook_selftest exercises the IPC seqlock + hook detours in-process
(no game/controller needed); passes.
Build: SafetyHook wired in (COOP_BUILD_HOOK=ON), Zydis via FetchContent.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
