BlackMark
00849d25d5
master opens in Studio, so this branch should too. One project, the port's own chip, flags mirrored by hand against the CMake build — and the acceptance is not that it builds but that it builds the same firmware: .text (7094 B) and .data (336 B) come out byte-identical to the CMake output from the same sources. libavr is found through $(LIBAVR_ROOT), the variable the CMake build already uses, so no machine path is committed; Studio expands it from the environment. The toolchain is named by flavour only, since nothing Studio ships can compile -std=c++26 and the path to one that can is per-machine state. The componentinfo file the project cannot load without is generated by libavr's tools/atmelstudio/componentinfo.py and ignored here, as are Studio's output directories. Release is what the flag gate compares, the presets defining no debug build; Debug carries the -Og -gdwarf-4 pair libavr's own debug preset uses. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
fantemp
Temperature-controlled fan firmware (ATmega328P, 16 MHz), rewritten on
libavr: thermistor on ADC0 sampled
free-running and averaged over 1000 conversions, fan on OC0B at 50 kHz,
115200 Bd serial console (help lists the commands), temperature
histogram persisted to EEPROM, watchdog-reset path into a boot-section
bootloader.
The Steinhart–Hart math of the legacy firmware (runtime doubles + libm log) is gone: the Beta equation and the cubic fan curve are evaluated consteval into flash tables — the firmware itself never touches floating point.
Build against a libavr checkout:
LIBAVR_ROOT=/path/to/libavr cmake --preset atmega328p-generated
cmake --build --preset atmega328p-generated
Atmel Studio
master carries a Studio solution, so this branch does too: ide/fantemp.atsln
builds the same firmware — byte-identical .text and .data to the CMake
build — from the same sources, with the flags mirrored by hand. Studio finds
libavr through $(LIBAVR_ROOT), the same environment variable the CMake build
uses, and needs a GCC 16.1 toolchain registered as flavour avr-g++-16.1.0;
nothing older can compile -std=c++26.
One generated file is required before the project will load, and one command
checks the flags have not drifted (both from libavr's tools/atmelstudio/):
python $LIBAVR_ROOT/tools/atmelstudio/componentinfo.py \
ide/fantemp.componentinfo.xml --device ATmega328P
python $LIBAVR_ROOT/tools/atmelstudio/check-flags.py --solution ide/fantemp.atsln \
--compile-commands build/atmega328p-generated/compile_commands.json \
--log build/atmelstudio.log
CMake remains the build system; the solution is there so the project opens in
Studio as its predecessor did. Only the Release configuration is gated against
CMake — the presets define no debug build — and Debug carries the -Og -gdwarf-4 pair libavr's own debug preset uses.
Legacy (yazoalfa submodules) stays on master.