The build emits an Intel HEX beside every loader image, but --update-loader
could not consume one: load_image() anchors every image at address zero, and
a loader HEX links at its base, so it decoded to a 32760-byte blob carrying
504 bytes of loader at the end. staging_content() then refused it as "loader
image is 32760 B, the slot holds 512" - an error naming neither the cause nor
the raw .bin the tool wanted instead.
Drop the blank below the base in the update path. The base comes from the
image's own info block rather than the device's, so an image built for
another target survives the slice intact and the preflight still reports it
as another target rather than failing to find an info block at all.
Verified on an ATmega328P: the full self-update flow driven straight from
pureboot_timeout-5s.hex, resident slot byte-for-byte against the image
afterwards, application preserved; both refusal paths unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The host tool was standard-library-only but POSIX-only with it: termios and
select() bound the port layer, and importing termios failed outright on
Windows, so the module could not even load there.
Split Port into PosixPort (unchanged) and a WindowsPort over the Win32 serial
API through ctypes, picked by os.name; every call site keeps the Port name.
kernel32 only, so the standard-library constraint holds.
Windows has no select() for a COM handle, so the read deadlines move into the
driver as COMMTIMEOUTS, re-armed per read: read_available() ends on a gap
longer than a USB-serial latency timer coalesces (16 ms on FTDI parts),
read_exact() on the count or its deadline. Opening asserts DTR and RTS as a
POSIX open does, so a board wiring DTR to reset still pulses it. A failed
configuration closes the handle before raising - a COM handle is exclusive,
and the leak met the next open as "Access is denied". Win32 takes any integer
baud and a driver may accept one its hardware cannot produce (an FT232R
reports back a baud of 3 and keeps the old divisor), so obvious nonsense is
refused where termios' table would have.
Tested against an ATmega328P on COM6: info, fuses, both memories programmed
and verified, session reconnect, hand-over, the loader self-update, and the
write guard on its own slot. test_planner runs on Windows now as well.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The image now runs from any 512-byte slot with every command intact:
control flow stays PC-relative, the write guard keys on the running slot
(the return-address anchor, computed once), the info block is addressed
from that same anchor as a byte pair (no absolute 16-bit address in the
image), and the application jump is an indirect call through a noipa-
laundered pointer to the absolute entry. 'J' — jump to a wire word
address, the one transfer primitive — replaces 'G': the host knows the
application entry from the info block, and moving between loader copies
needs arbitrary targets. The activation window is a compile-time 8 s
(PUREBOOT_TIMEOUT overrides), counted as a single calibrated poll loop.
A refused page no longer poisons the write-once temporary buffer (a real
silicon trap: the next write would program the drained data): every page
write discards the buffer first — CTPB on the tinies, on the mega the same
RWWSRE store that re-enables RWW after programming. The tinies' post-op
busy-waits go with it: their CPU halts through page erase and write.
488 / 502 / 504 B on t13a / t85 / mega — under the tinies' 510-byte budget,
whose last slot word is the host-managed trampoline: the resident's holds
the application entry, a staging copy's the jump through which an abandoned
update still times out into a loader.
The host tool updates the loader with itself: --update-loader installs the
identical image one slot below the resident, jumps into it, lets it rewrite
the resident, and restores the staging region from a state file — each
phase idempotent off the flash state, resumable after any interruption
(t13a: the staging slot carries the reset vector, written last in and
first out; t85: word 0 redirected around the resident rewrite; mega:
fuse-matrix preflight with a hard BOOTSZ gate and --assume-fuses for
simulators). Application flashing recovers by reset from any interruption:
patched page 0 and trampoline first, erase descending, and a walk-region
refusal behind --force on BOOTRST-below-loader megas.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
pureboot.py (Python stdlib only): images as raw binary or Intel HEX,
flash and EEPROM programming with read-back verify, erase composites,
fuse and info readout, activation-timeout configuration, and the
tinies' reset-vector surgery — the trampoline word below the loader,
page 0 written last.
The test spawns a simavr device (pureboot_device.c) — the mega's USART
as a pty; on the tinies a cycle-timed GPIO<->pty bridge for the polled
software UART plus the NVM module simavr's tiny cores lack (their SPM
opcode ioctls into a void and silently does nothing) — and drives it
with the real tool: knock from reset (erased-flash walk on the tinies),
program and verify both memories, timeout write, session reconnect, an
external reset through the patched vector, hand-over, and the fixture
application's banner. Results are cross-checked against ground-truth
memory dumps and an independent decode of the surgery's rjmp words,
red-verified against a sabotaged encoder.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
No inline assembly, no global register variables; libavr does the
datasheet work. The device speaks primitives — flash read/page-program,
EEPROM read/write, fuse read, info block, EEPROM-resident activation
timeout, hand-over — and verify, erase, reset-vector surgery, and
timeout configuration live in the host tool. 490 B on the ATtiny13A,
510 B on the ATtiny85, 484 B on the ATmega328P, each linked into the
top 512 bytes of flash; per-chip size tests gate all three.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
