pureboot.py --autobaud sends the 0xC0 calibration pulse and a single knock at
the host's chosen baud, reads the slimmed info block, and derives the full
geometry from the signature (AUTOBAUD_GEOMETRY, a table over every pureboot
chip). Everything downstream — flash, EEPROM, fuses, hand-over, verify — is the
fixed-baud path unchanged; the dropped write guard is host-transparent.
test/pbautobaud.py drives each variant over the GPIO⇄pty software-UART bridge
through the calibration handshake and a flash + EEPROM + fuse round-trip
cross-checked against the simulator's ground-truth memory, then repeats at
double the F_CPU with the same binary — the clock-agnostic property autobaud
exists for. Wired as pureboot.autobaud_pure/reg on the near-flash 328P and the
word-addressed 1284P. A wrong measured unit fails the flash/verify, so the test
also pins the codegen-coupled calibration constant against a toolchain bump.
Both variants green in sim on both chips at two clocks each; the fixed-baud
suite is unaffected. Only real-hardware acceptance on an RC part remains
(pureboot/autobaud.md).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
