Device: boot-section detection probes SPMCR beside SPMCSR, the link
picks any hardware USART through the instance-aware lookups (URSEL
chips included), WDRF reads MCUSR-or-MCUCSR, and the >64 KiB shape
lands — word-addressed wire flash (info flag bit 1, page byte 0 means
256, base as a word address), far reads through flash_load_far, a
single 32-bit byte-cursor page walk (the 256-byte page wraps its low
byte exactly), and slot arithmetic in words (the return address
already is one). Host: addresses stay bytes internally and scale at
the wire, the boot-fuse decode becomes a per-signature table (byte
index + BOOTSZ ladder — the m168A's lives in EXTENDED), and the
planner tests pin every chip's ladder plus the word-addressed info
decode. Tests: the device runner serves every mega over the USART pty,
pbapp banners over the right link, the update rehearsal synthesizes
its assumed fuses from the tool's own table, and the PI lint tracks
the renamed info symbol. All six classic-mega/168A targets pass the
full suite (size, PI, planner, protocol, reloc, self-update) at
466–504 B; the 1284P builds await a libavr far-path slimming to make
its 512.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
check_pi.py asserts the two link-time facts position independence rests on
(no absolute jmp/call; the info block within the image's first 256 bytes);
the size gates drop to 510 on the tinies for the trampoline word.
New per-chip tests beside the reworked protocol test: the planner units
(programming orders and their recovery properties, the surgery, staging
composition, boot-fuse decode, and the update preflight's error/warning
matrix over synthetic fuse bytes), the relocated-copy sweep (the identical
image installed one slot lower serves the full command set — the PI
acceptance test, and the one that caught the temporary-buffer trap), and
the self-update end-to-end: --update-loader to a re-timed build
(pureboot9, byte-different by PUREBOOT_TIMEOUT alone), then every
power-fail phase killed mid-write, restarted from the runner's flash dump,
and completed by a re-run with the application intact throughout. The mega
rounds run the BOOTRST-unprogrammed profile: the fixture application's 'L'
jump is the application-owned loader entry that profile relies on.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
pureboot.py (Python stdlib only): images as raw binary or Intel HEX,
flash and EEPROM programming with read-back verify, erase composites,
fuse and info readout, activation-timeout configuration, and the
tinies' reset-vector surgery — the trampoline word below the loader,
page 0 written last.
The test spawns a simavr device (pureboot_device.c) — the mega's USART
as a pty; on the tinies a cycle-timed GPIO<->pty bridge for the polled
software UART plus the NVM module simavr's tiny cores lack (their SPM
opcode ioctls into a void and silently does nothing) — and drives it
with the real tool: knock from reset (erased-flash walk on the tinies),
program and verify both memories, timeout write, session reconnect, an
external reset through the patched vector, hand-over, and the fixture
application's banner. Results are cross-checked against ground-truth
memory dumps and an independent decode of the surgery's rjmp words,
red-verified against a sabotaged encoder.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
