3 Commits

Author SHA1 Message Date
e4390d2ba8 build: the libavr pin advances past phase 6, at byte parity everywhere
The pin crosses libavr's phase 6 - the renamed system surface, the named
serial configs, the receiver-tolerance table, the paged SPM receipts -
and every loader image comes out size-identical: the full matrix on six
representative chips (the exhaustive cross product on three of them),
the stock and autobaud columns untouched, the four tsb tiers back on
their recorded floors at 510/526/638/836.

Byte parity was not free, and the two libavr defects it surfaced were
fixed there rather than absorbed here. The EEPROM write procedure's
step 2 - the SPMEN spin - had landed unconditionally and cost every
build six bytes for a wait a polled loader can never take; it is scoped
now, and the loaders state the datasheet's own omission clause
(spm_interlock::omitted, DS40002061B 8.6.3). The blocking page
erase/write grew an internal wait the tiers' settle() already provides,
so the tiers issue the command form and pureboot keeps its host-driven
sp_spm path.

What the port states rather than inherits: the stock 115200 at 16 MHz
sits +2.1 % past the receiver-tolerance table libavr now holds rates
to, so the hardware links say .allow_baud_error = true - the same
2.5 % envelope pureboot_baud_feasible() has always enforced, proven on
silicon across the fleet. rx_ready() reads readable() now.

Alongside the pin: rule 33's ASCII sweep over every source (docs keep
their typography), rule 34's InsertBraces in .clang-format with the
tree reformatted, std::array over the simavr runners' raw buffers, and
the stale Studio size in ide/README.md replaced by the claim its
check-flags gate actually holds.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-08-09 11:43:44 +02:00
4fa058653e tsb: reimplement TinySafeBoot on libavr in three size tiers
The native-UART fixed-baud TinySafeBoot protocol, ported onto libavr as a
crt-free boot-section loader, in three variants that trade clarity for size:

  tsb_pure   740 B  idiomatic C++: SRAM page buffer, separate flash/EEPROM
                    leaves, shared framing; the polled `unused` guard posture.
  tsb_tricks 658 B  unified runtime-flag paths (noinline/noclone), call-saved
                    global-register page walk — attributes only, no asm.
  tsb_asm    508 B  streaming store + hand-rolled UART/SPM/EEPROM/erase loops;
                    fits the 512 B boot section (BOOTSZ=11). Trims the optional
                    password gate and WDT-reset bail — unreachable in C++ with
                    both (hand-asm is ~15 % denser). Tiers 1-2 keep them and
                    live in the 1 KB section they fit.

All three are .text byte-identical across libavr's generated and reflect modes.
The CMake build strips the leaked -O3 (a Release build is silently -O3, not the
-Os this loader is measured against) and gates each variant's size against its
section. A simavr harness (test/device.c + test/tsbtest.py) drives the real wire
protocol over a pty and flashes the device; the size and protocol tests run in
ctest. Verified byte-for-byte against the reference tsbloader_adv (C#/mono):
activate, read info, flash write + verify.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-19 05:00:51 +02:00
8386d55813 Initial commit 2020-04-10 08:47:54 +02:00