pureboot: every libavr chip — 37 loaders, the m48 class, the 644 geometry

The chip table becomes family blocks covering all 37 targets. The m48s
are a new deployment class: no boot section, so the tiny profile spoken
over the hardware USART — host-patched reset vector, trampoline
hand-over, a 510-byte budget (474 B built), no fuse preflight — while
their RWWSRE store stays the buffer discard (Atmel-8271 §26.2); the
device keys the patch flag and the CPU-halt waits on the curated
boot-section capability and the discard on the RWWSRE bit itself. The
644s' 64 KiB is exactly the 16-bit byte space: plain LPM, byte wire
addresses, 498 B in a 512-byte slot — and their 1 KiB minimum boot
section holds the resident and staging slots together, so self-update
needs no fuse step (the update test's slot pick now keys word-flash on
base >= 64 KiB; base + slot merely touching the boundary stays
byte-addressed). The 1284 joins the 1284P's word-addressed 1 KiB slot at
558 B. BOOT_FUSE gains every boot-sectioned family's ladder and fuse
byte; the planner exercises them all. The sim scaffolding keys
patch-vector-ness instead of the atmega name prefix, the fixture app
picks its clock by family (the tiny25/45/13 builds surfaced the 16 MHz
fallthrough as garbled banners), and the runner's wrapped flash ioctl
performs the m48 discard simavr's no-RWW cores turn into a stray buffer
fill. Sizes across the fleet: 466-504 B megas, 474 B m48s, 498 B 644s,
488-502 B tinies, 558 B 1284s — every chip passing
size/pi/planner/protocol/reloc/update.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

test/pbsim.py

@@ -11,7 +11,11 @@ class Device:
     def __init__(self, binary, elf, mcu, hz, base_hex, page, baud, dump, reset_hex=None, resume=None):
         cmd = [binary, elf, mcu, hz, base_hex, str(page), str(baud), dump]
         if reset_hex is not None or resume is not None:
-            cmd.append(reset_hex if reset_hex is not None else ("0" if not mcu.startswith("atmega") else base_hex))
+            # Chips without a hardware boot section — the tinies and the
+            # m48s — reset to address 0 like silicon; the boot-sectioned
+            # megas re-vector to the loader base (BOOTRST).
+            patch = not mcu.startswith("atmega") or mcu.startswith("atmega48")
+            cmd.append(reset_hex if reset_hex is not None else ("0" if patch else base_hex))
         if resume is not None:
             cmd.append(resume)
         self.log = open(dump + ".log", "a")