audit: the port's pass — the scan that could not walk, and the drift a generator ends

--scan's walk was unwalkable on POSIX: probe rates have no termios
B-constant, so the first off-nominal probe raised out of the loop. The port
speaks termios2 BOTHER now (red-proven on a pty at 9984 Bd), the probe's
open lives inside the walk's error handling, an fd no longer leaks on an
unmakeable rate, and the swallowed unknown-signature reply is named at
timeout instead of reported as silence. CMakePresets.json's generator emits
the submodule toolchain path it had drifted from — a hand edit on a
generated file, exactly the class rule 10 exists for — and presets.generated
gates the pair from here on (the  marker CMake rejects at the
presets root stayed out; the check is the guard). The over-slot image guard
the tsb runner gained reaches the pureboot runner too; the GPIO bridge's
delivery comment states the hardware truth (RXC at the stop bit's sampling
point); the hardware suite gains the scan check — the one place the rate
physics is real; and the libavr pin advances over both audit rounds.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

test/test_scan.py

@@ -46,6 +46,24 @@ def main():
     if "9984000" not in report:
         fail(f"the absolute clock must scale with the found ratio:\n{report}")
 
+    # The walk's rates mostly have no termios B-constant, so the POSIX port
+    # must set them through termios2 — probed on a pty, which accepts the
+    # ioctl without caring about the speed. Without this every off-nominal
+    # probe would abort the walk on the platform --scan matters most on.
+    if os.name == "posix":
+        import pty
+
+        master, slave = pty.openpty()
+        try:
+            port = pb.Port(os.ttyname(slave), pb.scan_rate(9600, 4))
+            port.set_baud(pb.scan_rate(9600, -4))
+            port.close()
+        except pb.Error as error:
+            fail(f"PosixPort refused an off-nominal probe rate: {error}")
+        finally:
+            os.close(master)
+            os.close(slave)
+
     print("OK")