The uncapped, input-polling mock_game_test storm (thousands of presents/s, now
also driving the input/focus/MKB hooks) drove out a family of install/remove races
the slow vsync'd mock had masked. Fixes (hook/src/hook_install.hpp + hook_guard.hpp):
- Persistent hooks. The old model created a hook on install and DESTROYED it on
remove (= {}), freeing the trampoline; a detour about to call it (.stdcall) then
hit freed memory -> 0xC0000005. drain() can't fully close that window (a thread
can be inside the detour but not past its Guard ctor). So hooks are now created
ONCE and only enable()/disable()d across install/remove cycles -- never destroyed
during the session -- so a stale detour always calls a live trampoline (disabled,
it just runs the original). Reused, so no churn and no leak. remove_* therefore
disable()s + drain()s but does not destroy; install guards check .enabled().
- Install race. create_inline() enables the hook before the result is move-assigned
into the global the detour reads; a call landing in the detour mid-assign reads a
torn hook -> AV. install_inline() creates StartDisabled, assigns, then enable()s.
- drain() Sleep(1)s BEFORE each zero-check, so a thread that entered the detour but
hasn't reached its Guard registers before we conclude zero.
- Focus: publish g_orig_proc before SetWindowLongPtr activates the subclass (and
subclass_proc falls back to DefWindowProc if null); and disable the focus-query
hooks in reverse install order, because GetForegroundWindow shares user32 code
with GetActiveWindow (keep GFW hooked until GAW is unhooked).
- disable()/enable() [[nodiscard]] results are handled (logged), not (void)-discarded.
Storm now survives on every backend across repeated runs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The mock backends presented with vsync ("a game-like cadence") -- wrong for a
perf/stress fixture: it does trivial work on an RTX 4090, so it must run as fast
as it can. Vsync capped them to tens of fps (dx9 30, dx10 23, dx11 63, dx12 126),
which hid both capture-induced slowdowns and the hook-removal race. Uncapped now:
dx9/dx10 INTERVAL_IMMEDIATE / Present(0,0) (BLT), dx11/dx12 ALLOW_TEARING +
Present(0, ALLOW_TEARING) (flip), gl wglSwapIntervalEXT(0), vk IMMEDIATE/MAILBOX.
Measured no-hook: dx9 ~21000, dx10 ~2800, dx11 ~17000, dx12 ~12000, gl ~26000, vk
~24000 fps.
mock_game_test now adds a present-rate floor per backend (>= 300/s while
capturing): with the hook live every backend stays in the hundreds-thousands
(vk 13500, dx11 9000+, gl 1800, dx9/10 ~1000-1600, dx12 2500). This is the
dimension the frame-advance checks missed -- the Vulkan 144->3 FPS stall still
advanced frames -- so it catches a present-thread stall OR an accidental vsync.
The faster storm exposed the hook-removal UAF fixed in the previous commit.
README roadmap + lessons-learned updated (incl. correcting the old "reset makes
in-flight trampoline calls safe" claim). Full suite 21/21.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The capture must never change vsync, and must not frame-limit itself.
- Removed the ~150 Hz capture throttle from VkCapture. It was wrong: vsync already
paces capture (a 144 Hz FIFO game presents 144x/s, so we mirror 144x/s). The only
limiter left is ring backpressure (skip a frame if the reaper is behind), which is
correctness, not a cap, and never touches the game's present thread or sync mode.
- The layer/hook already pass VkSwapchainCreateInfoKHR straight through, so the
present mode (= the sync mode) is untouched. Added a presentMode log to prove it.
Measured on Sphere Spectacle (direct launch, layer attached): presentMode=2 (FIFO),
steady 144.0 fps, and with the throttle gone the mirror now tracks it at 144/s
(was capped ~130). The earlier 400-600 fps reading was a direct-launch artifact --
a non-foreground windowed FIFO app isn't throttled by DWM -- not the layer, and not
the case through Steam (144). vk_validate now states the mirror follows the present
rate (no throttle) and still asserts a present-rate floor.
Full suite 21/21.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Follow-ups from real-game testing:
1. The Vulkan capture must not change the swapchain sync mode, and must not
throttle/frame-limit capture (that's vsync's job). Remove the ~150 Hz throttle
and prove the present mode/rate is unchanged with vs without the layer.
2. DX12 capture overhead (~0.34 ms) is higher than DX11 (~0.05) / GL (~0.09) due
to the D3D11On12 bridge -- investigate and improve.
3. The mock game only drives D3D11/D3D12; add Vulkan/OpenGL/D3D9 renderers so every
capture path has game-driven coverage (this gap is why the Vulkan stall slipped
through). Make the mock game a real-world test across all backends.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The earlier validation concluded suspended-inject was "not applicable -- the
title requires launching through Steam." That was wrong; it was two bugs:
1. coop_vk_validate's inject mode launched the exe with CreateProcessW and a
null working directory, so the game couldn't load steam_api64.dll / resources/
(loaded relative to cwd) and never rendered -> no presents. Launch with the
game's own folder as cwd and it runs fine directly, no Steam needed.
2. The game resolves vkQueuePresentKHR / vkCreateSwapchainKHR via
vkGetInstanceProcAddr (volk's volkLoadInstance does this), but vk_hook only
substituted our detours when they were resolved via vkGetDeviceProcAddr -- so
the present bypassed the hook. Intercept those names in hk_vkGetInstanceProcAddr
too (our detours already gate on g_capture_enabled/g_device, so handing them out
before the device exists is safe).
With both fixed, inject mode captures Sphere Spectacle correctly: 1920x1080,
correct colors/orientation (screenshot), ~480 fps present while mirroring at the
~150 Hz throttle -- no present-thread impact (the VkCapture fix is shared).
Also makes the validator ASSERT a present-rate floor while capturing (it used to
report the rate and rationalize it, which is exactly what hid the 144->3 FPS
stall), and reports the true mirror rate from video.generation. Division of labor
is about who launches the game: layer for Steam-launched (can't suspend), inject
when we control the launch. README lessons-learned corrected accordingly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Against Sphere Spectacle (144 FPS, runs without Steam) the implicit-layer
capture dropped the game to ~3 FPS. Measured cause (per-stage trace in the
layer): the read-back ran on the game's PRESENT THREAD and spent ~370 ms per
1080p frame -- not the GPU copy (~2 ms) but the CPU swizzle, because the staging
buffer was a plain HOST_VISIBLE|HOST_COHERENT type (write-combined / uncached on
a discrete GPU), where a scattered CPU read runs at PCIe latency. 3 captures/s =
the 3 FPS the user saw.
Test-first: tests/vk_capture_perf_test reproduces the stall as a deterministic
unit test (372 ms/present, ratio 1.0 -> FAIL via `--sync`), then proves the fix
(0.02 ms/present, byte-correct BGRA->RGBA, ratio ~0 -> PASS).
Fix: extract the near-identical read-back from vk_hook.cpp and coop_vk_layer.cpp
into one shared coop::hook::VkCapture that:
* has the present thread only record + submit the copy (sub-ms) and return;
* runs a dedicated reaper thread for the fence wait + swizzle + D3D upload, off
the critical path, with a ring of in-flight slots (game never waits);
* allocates HOST_CACHED staging (fast CPU read), invalidating when non-coherent;
* throttles capture to ~150 Hz (a guest stream is <= the host refresh; no point
mirroring an uncapped 400+ FPS game and burning reaper CPU).
Real-game A/B: present rate now matches the no-capture baseline (605->470 vs
593->405 over the same ramp) with the mirror at ~130 fps -- no measurable impact.
Also adds present-thread overhead guards to the other GPU backends' hook tests
(present_overhead.hpp): DX11 0.05 ms, DX12 0.34 ms, OpenGL 0.09 ms overhead, all
asserted < one 60 Hz frame, so any future synchronous-stall regression fails.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Real-game testing of Sphere Spectacle (144 FPS, no focus throttle, runs without
Steam) surfaced two genuine defects the earlier "validation" missed:
1. The implicit-layer capture drops the game to ~3 FPS -- it stalls the present
thread on a full GPU readback every frame. Vulkan support is meaningless until
capture is (near-)free.
2. The inline-hook (suspended-inject) path must actually work on this title, or
be proven a true limitation -- Steam is not the reason it currently doesn't.
Final verification of both paths is to be done with the game launched through
Steam. Tracked as Current tasks; will move to Done as each lands.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds coop_vk_validate, a harness that drives the Vulkan capture path end-to-end
against a shipping title (default Sphere Spectacle, a pure-Vulkan game) and asserts
frames reach the shared texture and advance, the captured resolution/colors are
sane, saves a BMP screenshot for visual confirmation, and reports the present rate.
Findings:
- Layer method WORKS: coop_vk_layer mirrors the game correctly at 1920x1080 --
right colors/brightness, no BGRA/RGBA swizzle, no sRGB darkening (screenshot
confirmed). The layer captures every present (no drops).
- Suspended-inject "Auto-attach" is NOT applicable to a Steam title that must launch
through Steam: its exe renders nothing when launched directly, so there's no Vulkan
present to catch. The layer is the method for Steam Vulkan games (the early-inject
mechanism itself is covered by mock_game_test's suspended-launch path).
- The layer does video, but the game needs coop_hook.dll co-injected for focus-spoof
or an unfocused, event-driven game throttles itself to a few fps (looks like a
capture slowdown but isn't). A present-rate number alone can't prove "no FPS impact"
-- it's the game's own cadence; capture stays off the critical path (every present
copied, read-back on its own queue + present-semaphore re-chain).
Also adds SharedTextureSource::read_frame (bulk RGBA readback) for the screenshot.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The MKB subsystem covered message-loop (PostMessage) and polling
(GetAsyncKeyState/GetKeyboardState/GetCursorPos) games. Add the two remaining
read paths, both fed from the same synthesized state:
- DirectInput: vtable-swap IDirectInputDevice8::GetDeviceState (a COM method ->
vtable swap, not inline, per the x86 COM-prologue trap), reading the shared
vtable from a kept-alive probe device (the game made its devices before we
injected). Dispatch on cbData: 256 = keyboard BYTE[256] indexed by DIK
scan-code (map VK->DIK via MapVirtualKey VK_TO_VSC); DIMOUSESTATE = mouse
buttons + relative deltas from the forwarded cursor.
- Raw Input: games get no WM_INPUT while unfocused, so mkb_pump synthesizes it
(PostMessage WM_INPUT with lParam = one of our RAWINPUT slots) and the hooked
GetRawInputData serves that slot back (RID_HEADER + RID_INPUT). Covers keys +
buttons; relative raw-mouse movement isn't in the position-based MKB stream.
Both detours use the DetourGate safe-unhook guard, and the mock_game_test storm
exercises their install/remove. dinput_hook_test drives the real path end-to-end:
forward a key + mouse button through the ring, then a real DI keyboard/mouse
device's GetDeviceState returns them. The Raw Input round-trip is operator-
validated against a real game (too brittle to assert in-process). vtable_hook.hpp
factors the COM vtable-swap helper out for reuse.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extends the two-path correlation from rate-only to the full layout, removing the
"channels/bit-depth assumed = device" limitation. correlate_format tries each
candidate de-interleaving (float32 / int16; mono..7.1) of the hook capture, runs
the rate correlation per layout, and keeps whichever aligns with the loopback;
a wrong de-interleaving is noise and won't.
The catch: the hook can't know a guessed stream's real frame size, so its verify
tap pads each render buffer to the device block -- which over-reads stale staging
bytes for a stream with fewer channels/bits, scrambling the audio. So the tap is
now self-describing: it prefixes each buffer with its frame count
([count][count*device_block bytes]), and the host strips the padding per candidate
layout (take the real count*real_block of each chunk) before de-interleaving.
- audio_correlate.hpp: ChunkedCapture + chunk-aware correlate_format + candidate
layouts; absolute-margin confidence gate (the true layout scores ~1.0, a truly
ambiguous alternative within ~0.001 -- 2ch@R == 1ch@2R for identical channels --
is correctly left unconfident).
- audio_hook.cpp: chunked verify tap (free-space-checked so framing can't tear).
- audio_format_verifier: parse chunks; recover_layout path. AudioMirror now corrects
the full format.
- audio_correlation_test: layout recovery from padded chunks (stereo float, 16-bit
PCM, 5.1, mono). audio_verify_test gains scenario (b): 2ch on a multichannel
endpoint with distinct per-channel content (new env-gated ToneSource mode) ->
recovers ch=2/32-bit float end-to-end.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When the host attaches to an already-running game it never saw the stream's
Initialize, so the render-hook assumes the device mix format and measures only
the sample rate from the render cadence -- which a jittery game can make wrong
(intermittent pitch shift). But during the measurement window the game is still
audible, so we have the same audio twice: the hook (pre-mix, unknown format) and
a process-loopback (post-mix, the known device format). Cross-correlating them
pins the true rate from ground truth.
- common/include/coop/audio_correlate.hpp: the pure correlator. Resample the hook
by each candidate standard rate up to the device rate and score how well it
aligns with the loopback across the window (drift-detecting). audio_correlation_test
recovers every rate (score ~1.0 vs ~0.01 for wrong ones), incl. 44100-vs-48000,
and rejects unrelated signals.
- Hook measurement tap: a host-set verify_capture ring flag makes the hook push a
still-being-measured (guessed) stream's raw pre-mix bytes WITHOUT silencing, so
the host can co-capture both signals (a silenced game's loopback is silent).
Inert by default -- the shipping no-echo path is untouched.
- host/src/audio/audio_format_verifier: co-captures hook + loopback and correlates,
feeding a correction into the existing override channel. Wired into AudioMirror's
measurement window (hidden in the gap loopback already covers, so exact streams
pay nothing). audio_verify_test drives it end-to-end against coop_mock_game.
Rate vs layout are coupled (correlating the waveform needs the right channel
de-interleaving), so this step assumes the hook layout matches the device (the
common stereo-on-stereo case); recovering a different channel count / bit depth
is step b.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Spamming a subsystem toggle (the "Mirror video" button) could crash the game:
remove_*_hooks freed a hook's shared D3D / Vulkan / IPC state immediately, while a
capture detour was still mid-flight on the game's render thread -> use-after-free.
Only the audio hooks had the safe-unhook drain; the video (Present/D3D9/D3D10/GL/
Vulkan) and XInput/focus/MKB hooks did not.
Test-first: mock_game_test now runs an aggressive hook/unhook storm -- a separate
thread thrashes every subsystem on/off while the game presents, across all backends.
It crashed gl + vk (0xC0000005) and failed dx9 capture-resume before the fix.
Fix (hook/src/hook_guard.hpp, DetourGate): each detour wraps its body in an RAII
active-count Guard; remove_* restores the hook first (so no new detour starts),
drains the in-flight detours to zero, and only then frees the shared state. Vulkan
is special-cased -- the game caches hk_vkQueuePresentKHR, so removal closes an
atomic capture gate (detours then pass through to the real present), drains, then
frees the read-back resources. Storm now passes on every backend.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a fourth Current Task: exercise the Vulkan capture path end-to-end on
Sphere Spectacle (Steam appid 1123040) via both early-presence methods
(Auto-attach and the implicit coop_vk_layer), verifying capture, image
correctness, and no performance regression.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the Future-work section with a single "Current Tasks" list:
- Injection hardening: toggling "Mirror video" has crashed a real game
(Brotato) via a hook install/remove race. Test-first task -- make
mock_game_test's hook/unhook stress aggressive enough to reproduce the
crash (tight video-subsystem toggles from a separate thread while the game
presents, across all backends), then apply the audio hooks' safe-unhook
guard (epoch bump + restore-then-drain in-flight detours) to the Present /
D3D9 / D3D10 / OpenGL / Vulkan hooks.
- Audio format by correlating the loopback (known device format) and
render-hook (unknown format) captures instead of guessing: (a) rate
verification/correction, (b) channel + bit-depth recovery.
- Mouse + keyboard forwarding (Raw Input / DirectInput) folded in.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The hooked path must capture the game's frames AND mute its local playback
("no echo"). The mute was implemented as zero-the-buffer (memset) + release
with AUDCLNT_BUFFERFLAGS_SILENT. Zeroing num_frames*block is only safe when
block is the real frame size; for a guessed format (late attach -- the
Brotato case, where we never saw Initialize) the guessed block can exceed
the real buffer, so the conservative code skipped the whole mute for guessed
streams. That left the game audible: it played locally AND the mirror
re-rendered the same audio a few ms later = a metallic, out-of-sync double.
Fix: AUDCLNT_BUFFERFLAGS_SILENT already makes WASAPI ignore the buffer
contents and play silence -- it mutes with no write at all, so it's safe for
any format. Decouple the two: always mute via the flag; keep the memset only
for an exact/override format (belt-and-suspenders). One-line behavior change;
the byte-incompatible cases confirm the flag-mute never over-writes.
Test-first (now a documented rule, README "Tests"): added an
audio_frames_silenced() counter and a mute assertion to audio_hook_test for
both the exact and guessed paths. The guessed assertion FAILS on the unfixed
code (3 rates) and passes after the fix -- the regression guard for this bug.
README also updates the now-correct no-echo limitation and adds a
lessons-learned writeup.
ctest 17/17. Brotato confirmed fixed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
All of M1 (UI-fit + live inspection) and M2 (every backend mock + capture, incl.
the Vulkan implicit layer + checkbox) are done, so the "Current work" roadmap
section is removed -- only Future work (Raw Input / DirectInput MKB) remains.
Architecture lists the Vulkan layer as the implemented early-presence path;
lessons-learned add the chain-dispatch + loader sType 47/48 gotcha; build/test
docs note the layer artifact + coverage; submodule list updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The opt-in implicit-layer piece requires the loader/layer interface header
vk_layer.h, which Vulkan-Headers doesn't ship (it's in Vulkan-Loader / the SDK)
-- so it needs a new submodule or hand-declared link structs, confirming it's a
separate, higher-risk component rather than a quick add.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Architecture now lists Vulkan as a hooked producer (GPA interception + read-back,
early-presence required). Adds a lessons-learned bullet (can't late-hook Vulkan;
the present-semaphore re-chaining trap; the too-late heuristic; early-load
testing). mock_game_test docs note the suspended-launch capture + too-late check.
The Vulkan milestone is trimmed to its one remaining piece -- the opt-in implicit
layer for immediate-init games -- with the capture/banner/best-effort marked done.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reflect that the Vulkan mock backend + submodules are done, and scope the
remaining Vulkan capture honestly: hook vkGetInstance/DeviceProcAddr +
intercept device/swapchain creation, and read the presented image back with
vkCmdCopyImageToBuffer (the same read-back pattern as D3D10/D3D9/OpenGL --
simpler/robuster than a VK_KHR_external_memory keyed-mutex blit). Note testing
needs the early-load path (late-inject can't catch a Vulkan present), and Vulkan
games mirror via WGC meanwhile.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The headless ui_fit_test proves panels *fit* their windows but not that the
overlay *looks* right. Document that closing M1 requires running the actual
coop_host.exe (-DCOOP_TEST_HARNESS=ON), driving it to maximum info, taking an
F10 screenshot, and eyeballing the real overlay -- a green unit test is not a
substitute for looking at the product. Verified live: every panel fits and reads
correctly at the monitor resolution, and the live `uifit` reports "fit".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add render_gl.cpp (selectable as `gl`): renders the animated pattern with
scissored clears (glClear + glScissor -- GL 1.1, exported straight from
opengl32) and presents with SwapBuffers. No glad/submodule needed: a legacy
wglCreateContext + <GL/gl.h> suffices, so the planned loader dependency was
dropped. GL is bottom-left origin and the capture flips top-down, so the
frame-counter block is drawn at the GL top to land top-left in the captured
image. Window class gains CS_OWNDC for a stable GL DC; best-effort vsync via a
runtime wglSwapIntervalEXT lookup.
The GL SwapBuffers/wglSwapBuffers hook now bumps the shared present counter
(it's the GL present), so present_calls works for GL games too. mock_game_test
decodes GL frames through the existing glReadPixels capture path; 15/15 ctest.
Roadmap: OpenGL milestone done and removed (Vulkan renumbered to M2);
architecture/lessons/test docs updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New d3d9_hook.cpp (own file like opengl_hook): inline-hooks
IDirect3DDevice9::Present (vtable index 17, discovered from a throwaway device;
clean prologue so inline is safe, stdcall() on x86) and read-backs the backbuffer
with GetRenderTargetData into a D3DPOOL_SYSTEMMEM surface, swizzles BGRA->RGBA,
and uploads it into the shared keyed-mutex texture on a hook-owned D3D11 device
(a D3D9 surface isn't D3D11-shareable). Both plain D3D9 and D3D9Ex call this same
Present, so one read-back path serves both -- the GPU shared-surface fast path
the plan sketched for D3D9Ex wasn't worth it. Wired into the video subsystem
(install/remove in dllmain); hook links d3d9.
mock_game_test decodes DX9 + DX9Ex frames through the hook; 15/15 ctest (incl.
the x86 sub-build). Roadmap: DX9 milestone done and removed (remaining
renumbered); architecture + lessons updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A pure-D3D10 game's backbuffer QIs to ID3D11Texture2D but that view reads back
empty (content lives on the game's D3D10 device), and a D3D11 backbuffer also
QIs to ID3D10Texture2D -- so GetBuffer can't discriminate. The reliable signal
is that a feature-level-10 device rejects CreateTexture2D with the NT-handle
keyed-mutex share flags (E_INVALIDARG). The present hook now tries the D3D11
fast path and, on that failure, switches (sticky) to reading the backbuffer
through the game's own D3D10 device into a staging texture and uploading it into
the shared texture on a hook-owned D3D11 device (Map blocks until the GPU copy
completes -> no cross-device race). The host reader is unchanged.
mock_game_test now decodes DX10 frames through the hook (monotonic/advancing)
alongside DX11/DX12; 15/15 ctest. Roadmap: DX10 milestone done and removed
(remaining renumbered); architecture + lessons updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add panel overflow instrumentation (record_panel_fit reading ImGui ScrollMax),
a forced layout-reference + debug-aware center split, and host harness commands
(uisize/uifit). New headless ui_fit_test drives the real Controllers + Audio
panels at reference resolutions with Debug details on and asserts no panel
overflows its assigned size; the Audio panel gains a demo mode so its richest
content renders without a live mirror.
Fixes from the measured overflow: widen the center column (was too narrow ->
horizontal overflow), merge the Controllers poll/round-trip tables and fold the
trigger line into the slot line, and make the center height split
Debug-details-aware (Video's height is mirroring-driven, not debug-driven, so a
static split can't serve both modes). Controllers + Audio now fit at 1920x1080
with max info. Video/Injection/Log fit is finalized at the end via the live
uifit harness (M1 stays open until then).
15/15 ctest.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Restructure the roadmap into one "Current work" section where each rendering
API is a single milestone that builds its mock-game backend and the injected
capture for that same API side by side, so each API reaches verified
end-to-end before the next. Adds an M1 end-user UI fit pass (drive the overlay
to maximum info via the harness, screenshot, assert every panel fits its
window; resize/rearrange otherwise) kept green by every later milestone.
Folds in DX10, DX9 (D3D9Ex + plain non-Ex), OpenGL, and Vulkan (best-effort
inject + opt-in implicit layer, too-late red prompt). Drops the old Vulkan/
D3D9 future-work bullets.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
mock_game_test now launches coop_mock_game at 44100/48000/96000 (PCM + float)
and asserts the hook measures each variant's rate through the full inject path
(+ non-silent capture) -- the "all audio variants work" part of the suite.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
mock_game_test launches coop_mock_game (DX11/DX12, frame-numbered A/V), injects
coop_hook.dll, opens the hook's shared video texture, and decodes the frame
number from the captured pixels to assert a monotonic, advancing mirror for
both backends (catches dropped/stale/out-of-order frames). Then it runs an
A/V + hook/unhook stress pass and confirms no crash + capture resumes. Adds a
read_pixel() readback to the shipping SharedTextureSource for the decode.
Robust to repeated/CI runs (kills stray games, retries inject). Trim the
roadmap (the mock-game item is done) and document the test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Found by the mock-game capture/audio/hook stress test (toggling the audio
subsystem while a game renders):
1. Guessed-stream silence over-WRITE: hk_ReleaseBuffer zeroed num_frames *
guessed_block bytes, but a guess can be larger than the real per-frame size
(e.g. an 8ch device guess for a 2ch game), so the memset wrote past the real
buffer into adjacent audio memory -> intermittent access violation in the
game. Fix: capture but do NOT silence a guessed stream (it stays audible --
echo); only an exact/override format, whose frame size is known, gets the
no-echo silence.
2. VtableHook::remove nulled m_original, racing an in-flight detour into a null
call -> keep it valid (the original function stays mapped).
3. g_ipc was a non-atomic pointer read on the hot path while unhook nulled it
(TOCTOU) -> make it atomic, load once.
4. Stale GetBuffer/ReleaseBuffer pairing across a toggle -> epoch-stamp the
GetBuffer and only capture in the same hooked epoch.
5. COM-object churn: re-creating the probe client every enable raced AudioSes ->
build the probe once, keep it across toggles (only swap vtable slots);
release on detach (shutdown_audio_hooks). Plus drain in-flight detours before
tearing down state.
Stress test: 0 crashes in many repeated runs (was ~50%). Guessed streams now
echo (the no-echo path is reached via an exact/auto-attach format or override).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add an "Auto re-attach this game on relaunch" checkbox (default off, never
persisted, shown while attached or terminated). While on and the target has
terminated, the host polls the process list for the same image name and
re-injects the moment it reappears -- built on the existing
re-attach-by-image-name path, so there's no target to pick. The kill+relaunch
recovery for a wrong audio format: re-attaching early catches
IAudioClient::Initialize and reads the exact format.
Validated live (harness): inject coop_tone -> kill -> relaunch -> auto
re-injected into the new pid, and early enough that the format came back as
Exact. Trim README.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Persist audio overrides keyed by game image name (coop_audio_overrides.ini
next to the exe) so a known-bad game is auto-corrected on its next launch:
on attach to a guessed stream the host applies any saved override, and a
manual Override now saves too. A format the hook catches exactly at
IAudioClient::Initialize is auto-saved as that game's override (ground truth);
if it overwrites a differing stored value, a warning is logged. Host-originated
log lines now reach the Log window via IpcServer::host_log (color-coded).
Validated live (harness): a pre-seeded override for coop_tone is auto-applied
over the guess (state -> manual override, 48000/2/16). audio_overrides_test
covers persist/reload/case-insensitive lookup/differing-overwrite. Trim README.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a per-stream op channel in AudioRingHeader (op_seq + op_* fields, version
2): the host posts re-measure / override commands, the hook applies them and
re-publishes (bumping format_generation), and the host rebuilds its render
client live on the change. The Audio panel (under Debug details) gains a
"Re-measure rate" button and a rate/channels/bit-depth/format override -- for
when detection is wrong or the channels/bit-depth were unrecoverable.
Also add a debug-only IPC test harness (-DCOOP_TEST_HARNESS, off by default,
absent from the shipped host): a file-based command channel that drives the
host's real UI code paths (inject / audio / re-measure / override / screenshot
/ status) for scripted validation, instead of unreliable synthetic mouse input.
Used to validate live: late-attach to coop_tone@44100 -> measured 44100,
promoted to hooked; override -> 2ch state, re-measure -> reconverge.
Trim the README roadmap to what's left; document the harness + rate_estimator_test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Capture the rendered back buffer to a timestamped PNG next to the exe via
WIC, triggered by F10 (delivered even when unfocused). The capture runs in
render_frame just before Present so it includes the ImGui overlay, and reads
off the GPU so it works regardless of window focus, z-order, or occlusion. A
brief toast confirms the save (drawn the next frame, so it's never in the shot).
F10 chosen to avoid Steam's F12; its WM_SYSKEYDOWN is swallowed so Windows
doesn't enter menu mode. Documented in the Help menu + README.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Document the diagnosis and plan for the unreliable hooked-audio format
detection: robust rate measurement (longer window, atomic endpoints,
consensus, reject non-standard rates), visible + red-flagged loopback
fallback with auto-promote, a re-measure button and per-game persisted
format overrides via an AudioRingHeader op channel, session-only
auto-re-attach on relaunch, and color-coded log levels. Drop the stale
"previous backlog is all shipped" note.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hooked audio mirroring played back pitch-shifted on games we inject into
that render at a non-device sample rate (e.g. Godot/Brotato render 44100 Hz
on a 48000 Hz endpoint via WASAPI AUTOCONVERTPCM). We attach to an
already-running game, so the render-hook never saw its IAudioClient::
Initialize and assumed the device mix format -- right channels/bits, wrong
rate -- so 44100 audio was rendered as 48000 (+~1.5 semitones).
Fix: treat a pre-existing client's format as a guess and measure its true
sample rate from the render cadence (frames/sec over a steady-state window,
snapped to the nearest standard rate) before publishing it, deferring
capture until verified. Discard the first measurement window so the
buffer-fill burst at attach time doesn't over-count. Streams created after
we inject still carry their exact Initialize format.
Channels/bit-depth genuinely can't be recovered for a pre-existing client:
AUTOCONVERTPCM hands GetBuffer a fixed staging buffer (no buffer stride to
measure -- confirmed empirically) and WASAPI exposes no API for the format.
They stay the device-mix guess, which is correct for the common case
(engines render stereo float, matching the endpoint). To keep a wrong guess
safe, a VirtualQuery clamp stops the capture copy from ever over-reading the
source buffer when the guessed bytes/frame is too large.
Surface all of this: a per-stream AudioFormatState (known / measuring /
measured rate (ch/bits assumed)) in HookStatus, shown in the Audio panel for
the hooked path and as "device endpoint (known)" for loopback; clear hook
logs; and enriched mirror status strings. Documented in README (Limitations
+ Lessons learned). The loopback fallback was always correct (post-mix at
the device format).
Tests: extract a shared, configurable ToneSource (used by coop_tone and the
hook self-test); coop_tone takes rate/channels/bits/format args. Rewrite
audio_hook_test to a format matrix x both code paths -- see-init (exact) and
guess (rate measured) -- plus a byte-incompatible guess that asserts the
clamp keeps capture safe. The matrix caught the attach-burst over-count.
audio_loopback_test now spawns coop_tone at several source formats to
confirm loopback is format-agnostic. 11/11 x64 + 3/3 x86 pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Resolves the DX12 mirror stutter and makes dropped frames observable.
Decouple the D3D11On12 copy from the game's present queue. Submitting the
copy on the game's own present queue (the prior approach) ordered it
correctly but stalled the game's presents: GPU back-pressure, plus the
shared keyed-mutex AcquireSync is a CPU-blocking call on the render
thread. Running it on an independent queue avoids the stall but races the
game's render -> stale frames. Do both: run the copy on our own queue and
order it after the frame with an ID3D12Fence the game's present queue
signals (near-free) and our queue waits on. The present queue is still
recovered for late injection via the ExecuteCommandLists hook (now used to
signal the fence, not host the copy). Producer AcquireSync stays
non-blocking (timeout 0) so a busy mutex drops a mirror frame instead of
stalling the game.
Add drop detection (protocol v12 -> v13). The hook counts captures skipped
because the keyed mutex was busy (VideoShare.frames_dropped); the host
counts published frames it never displayed (generation gaps). The Video
panel shows "Frames lost: N/s capture N/s display", red when nonzero.
This confirmed the game-window-vs-mirror behavior is a display-path
artifact (unfocused windows lose VRR/independent flip), not a capture loss.
Add a one-shot present-pattern log: per distinct swapchain (size/format/
buffer index) and per distinct present-flags value, with DXGI_PRESENT_TEST
spelled out as an occlusion probe that draws nothing -- which is why
Miles Morales shows ~2 presents per captured frame (the test present is
counted but produces no frame).
Docs: add the DX12 capture lessons to the README (rotating back buffer,
fence/own-queue, capture-at-Present decoupling from DWM) and drop the now
-moot DX12 overhead future-work item.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Center stack heights set to Controllers 45% / Video 32% / Audio 23% (measured from
the operator's preferred layout): Controllers has the most content, Audio the least.
- Future work: MKB forwarding for Raw Input / DirectInput games (the message +
polling-state path doesn't reach them -- e.g. Trails through Daybreak uses Raw
Input), and reducing the D3D11On12 (DX12) per-frame capture overhead.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Games with several concurrent WASAPI render streams (e.g. Spider-Man: Miles
Morales) only had their first ("primary") stream mirrored; the rest kept playing
locally and never reached the guest. Now the render-hook captures + silences EVERY
tracked stream into its own ring (coop_audio_<pid>[_<index>]), each published with
that stream's own detected format (Initialize when caught, else GetMixFormat -- the
per-stream format detection, now actually used per ring rather than only for the
primary). The host creates a ring per stream and mixes the same-format streams with
a soft clip (host/src/audio/audio_mix.hpp); streams whose format differs from the
primary are still silenced (no echo) but skipped from the mix (would need
resampling).
The single-stream case is byte-for-byte unchanged: when only one stream is active
the host passes it through without the mixer, so the common path has no overhead or
fidelity change.
Verified: new audio_mix_test covers the decode/sum/soft-clip/encode math (float32 +
int16); audio_hook_test (x64 + x86) still passes, guarding the primary
capture+silence path against regression; full build x64 + x86 clean; ctest x64
11/11, x86 3/3. Multi-stream mixing against a real multi-stream game needs a live
session to fully confirm.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
D3D12 games (e.g. Spider-Man: Miles Morales) fire the Present hook -- the DXGI
swapchain's Present is the same vtable function for D3D11 and D3D12 -- but
GetBuffer(0) as ID3D11Texture2D fails, so the hook used to idle. Now, when the D3D11
GetBuffer fails, present_hook bridges via D3D11On12: it gets the game's ID3D12Device
from the backbuffer, creates its own DIRECT command queue on it (no need to hook the
game's ExecuteCommandLists), builds an ID3D11On12Device, CreateWrappedResource's the
D3D12 backbuffer, and CopyResource's it into the existing shared keyed-mutex texture
-- so the host side is unchanged. The bridge is created lazily and torn down with the
hook.
Verified with a new in-process dx12_present_hook_test: it drives a real D3D12
swapchain (clears a backbuffer, Presents) and asserts present fired, the backbuffer
was bridged into the shared texture, and a second device reads the exact color back
by name -- {51,102,153,255}. Full build x64 + x86 clean (the x86 hook compiles the
D3D12 path too); ctest x64 10/10, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The FPS readout only measured the host's own render rate, hiding capture stutter.
The Video panel now shows a "Pipeline rates" section:
- Tool render (host FPS / frametime, as before);
- hooked source: Game present (/s, from VideoShare.present_calls deltas), Hook
publish (/s, generation deltas), and capture->display latency avg/min/max ms;
- WGC source: WGC capture (/s) from a new WindowCapture frame-arrival counter
(game present + latency are n/a, since WGC frames aren't game-timestamped).
Latency uses a system-wide clock: protocol v11->v12 adds VideoShare.present_qpc,
stamped by the hook at publish (publish_video_frame); the host measures
now_qpc - present_qpc per newly published frame, windowed to min/avg/max each second.
Verified: present_hook_test (x64 + x86) now asserts present_qpc is stamped; full
build x64 + x86 clean; ctest x64 9/9, x86 3/3. The live rate/latency numbers need a
real game mirroring to read meaningfully; wiring validated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Games that ClipCursor / re-center via SetCursorPos while focused trap the operator's
mouse (the focus spoof makes them think they're always focused), so the operator
can't reach the overlay. The Focus subsystem now inline-hooks ClipCursor and
SetCursorPos (stdcall trampolines): while "release" is requested it forces
ClipCursor(NULL) and swallows the re-centering SetCursorPos; otherwise it passes them
through. It frees any existing clip at install and re-frees each worker tick (covers
one-time clippers and a runtime clip->release toggle).
Host: protocol v10->v11 adds HookControl::allow_cursor_clip (0 = release, the
default). The Injection panel gets a "Release operator cursor" checkbox and an F2
hotkey (InjectionPanel::toggle_cursor_release); default released, since the guest
plays via the pad so the game's clip is operator-only.
Verified: full build x64 + x86 clean; ctest x64 9/9, x86 3/3. The cursor behavior
against a real clipping game (Trails through Daybreak) needs a live injected session
to confirm; logic reviewed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Makes it possible to isolate an input->tool problem from a tool->game one in the
Controllers panel (under Debug details):
- which backend fed each slot is already shown via the per-pad source tag
("XInput #0" / "Steam Input") in the Incoming section;
- a new "Round-trip" table shows, per slot, the state we forwarded (the active
backend's pad) next to what the game actually read back, highlighting matches.
For the round-trip, the XInput hook now echoes the state it returns to the game into
the status (protocol v9->v10: per-slot read_state in HookStatus).
Verified: hook_selftest (x64 + x86) asserts the hook records the game-read state;
full build x64 + x86 clean; ctest x64 9/9, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The XInput hook used to swallow XInputSetState; now it records the requested
left/right motor speeds into the status back-channel (protocol v8->v9: per-slot
rumble_left/right in HookStatus). Each frame the host reads them and, only on
change, drives the guest's actuator via the active backend:
- XInput: XInputSetState on the guest's slot (the open question is whether Steam's
RPT virtual pad accepts vibration and routes it to the guest -- needs live RPT);
- Steam Input: SteamInput TriggerVibration on the slot's controller handle, with the
XInput fallback for slots Steam isn't driving.
InputSource gains a set_rumble(slot,left,right) hook (default no-op) implemented by
both backends; SteamInputSource now tracks per-slot controller handles + which slots
it drives.
Verified: hook_selftest (x64 + x86) now asserts the hook records the rumble from
XInputSetState into the status; full build x64 + x86 clean; ctest x64 9/9, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Forward the host window's clicks and keystrokes into the injected game so guests
can drive menus / "Press Start" / text entry that a pad can't.
Protocol (v7->v8): new HookSubsys_Mkb and an SPSC MkbRing of MkbEvents in
SharedBlock (host produces, hook consumes); push/pop helpers.
Hook (hook/src/mkb_hook.cpp, new subsystem): a worker-loop pump drains the ring at
~5 ms and PostMessageW's the matching window messages (WM_KEY*/WM_CHAR, mouse
buttons, WM_MOUSEWHEEL) to the game's main window; it also inline-hooks user32
GetAsyncKeyState / GetKeyboardState / GetCursorPos (stdcall trampolines per the x86
rule) to report a synthesized state so polling games react too. Removing the
subsystem clears all synthesized keys (no stuck input).
Host: the Injection panel gets a "Mouse + keyboard forwarding" subsystem toggle
(opt-in, default off -- the toggle is the hook). host/src/inject/mkb_forward.cpp
reads ImGui IO each frame and forwards only when the host window is focused and
ImGui isn't capturing the event; keyboard always, mouse only while mirroring (clicks
+ wheel, not movement). Mouse coords are mapped through the letterbox to game-client
space (host/src/inject/mkb_map.hpp), accounting for WGC-of-decorated-window vs
hooked/borderless. RawInput/DirectInput games are out of scope for this version.
Verified: new mkb_ring_test + mkb_map_test pass; full build x64 + x86 clean; ctest
x64 9/9 and x86 3/3 green (no regression from the protocol bump). The subsystem is
opt-in, so it can't affect existing behavior unless enabled; the end-to-end
click-into-game path needs live Remote Play + a real game to confirm.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
"Forward synthetic test input" is a controller-debug aid, so it now lives in the
Controllers panel (gated behind Debug details, disabled until the XInput hook is
attached) instead of the Injection panel. ControllersPanel owns the flag and exposes
test_input(); main feeds it into InjectionPanel::set_test_input each frame, so the
existing synthetic-pad substitution in publish() is unchanged.
Verified: x64 build green; review (default view no longer shows it in Injection;
appears in Controllers under Debug details).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The live indicator compared frames_rendered to the previous UI frame's value, but
audio buffers release in bursts so most frames saw no change -- the cell flickered
between a green dot and grey "idle". Now each stream remembers when it last advanced
and reads "live" for a short window (0.4 s) afterwards, with a ~2 Hz frames/s
estimate next to it; otherwise "idle". Steady and readable for multi-stream games.
Verified: x64 build green. Full visual confirmation needs an injected, audio-playing
game with the per-stream table open (Debug details); logic reviewed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Panels used to Begin at cascade positions, so they overlapped and clipped. A new
apply_panel_layout() in app_chrome positions/sizes each panel from the main
viewport work area (ImGuiCond_FirstUseEver, still movable): Injection left column
full height (room for hook diagnostics), Controllers/Video/Audio stacked in the
center column, Log right edge full height (max room for the log stream). Added a
"View -> Reset layout" menu item (request_layout_reset / apply_layout_end_frame
re-apply the defaults once via ImGuiCond_Always). Each panel now calls
apply_panel_layout(Panel::X) instead of its own ad-hoc SetNextWindowPos/Size.
Verified live: captured the host overlay -- Injection (left, full height),
Controllers/Video/Audio (center stack), Log (right, full height), no overlap among
the panels. x64 build + ctest green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New host/src/inject/window_list.{hpp,cpp} enumerates visible, titled, non-tool
top-level (alt-tab-style) windows via EnumWindows -- root-owner only, our own
process excluded -- and maps each to its owning pid + image name. The Injection
panel now defaults to this window list (each row "title [process.exe pid]", with a
filter over title or process), since there are far fewer windows than processes and
a window maps straight to the HWND the capturer wants. The full process list stays
as the advanced picker under Debug details.
Verified live: launched the host and captured its window -- the picker lists real
windows (Discord/Firefox/Explorer/...) in "title [exe pid]" form, filter present,
and the host's own window correctly excluded. x64 build green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
In the Terminated state the Injection panel now offers a Re-attach button: it
refreshes the process list and finds live processes whose image name matches the
original target's (case-insensitive). Exactly one match -> tear down the stale IPC
channel and inject into the new pid via the normal path; several matches -> don't
guess, filter the picker to the name and prompt the operator to pick one; none ->
report it. Saves hunting for a relaunched game's new pid in the list.
Verified: x64 build + ctest 7/7 green. Re-attach is a Terminated-state button flow,
so its end-to-end behavior is best confirmed live (ImGui clicks can't be scripted);
logic reviewed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Injection panel kept showing "Attached" after the game exited. Now it tracks
target liveness each frame (InjectionPanel::tick from the main loop, independent of
panel visibility):
- a SYNCHRONIZE|QUERY process handle taken at inject time -> WaitForSingleObject
detects the process exiting (Terminated);
- the hook heartbeat stalling for ~2 s while the process still exists flags a
distinct Hung state (games here can freeze without exiting).
The panel shows a clear colored banner per state and disables the subsystem
hook/unhook controls and the synthetic-input toggle when the target isn't alive.
game_hwnd() returns null once Terminated, so the Video and Audio panels drop to
idle instead of chasing a dead window.
Verified: x64 build + ctest 7/7 green; host launches and renders the panels without
regression (screenshot smoke test). The interactive terminated/hung visual against a
real game is best confirmed in a live session (ImGui injection can't be GUI-scripted).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
