uart/hardware1.hpp

#pragma once

#include <stdint.h>

#include <avr/interrupt.h>
#include <avr/io.h>

#include "config.hpp"
#include "hardware.hpp"

#define FORCE_INLINE __attribute__((always_inline))

namespace uart {

namespace detail {

#if defined(__AVR_ATmega1284P__)

struct Registers1 {
	static constexpr volatile auto *IO_REG = &UDR1;
	static constexpr volatile auto *CTRL_STAT_REG_A = &UCSR1A;
	static constexpr volatile auto *CTRL_STAT_REG_B = &UCSR1B;
	static constexpr volatile auto *CTRL_STAT_REG_C = &UCSR1C;
	static constexpr volatile auto *BAUD_REG_L = &UBRR1L;
	static constexpr volatile auto *BAUD_REG_H = &UBRR1H;
};

enum class ControlFlagsA1 {
	MULTI_PROC_COMM_MODE = MPCM1,
	SPEED_2X = U2X1,
	PARITY_ERROR = UPE1,
	DATA_OVER_RUN = DOR1,
	FRAME_ERROR = FE1,
	DATA_REG_EMPTY = UDRE1,
	TRANSMIT_COMPLETE = TXC1,
	RECEIVE_COMPLETE = RXC1,
};

enum class ControlFlagsB1 {
	TX_DATA_BIT_8 = TXB81,
	RX_DATA_BIT_8 = RXB81,
	CHAR_SIZE_2 = UCSZ12,
	TX_ENABLE = TXEN1,
	RX_ENABLE = RXEN1,
	DATA_REG_EMPTY_INT_ENABLE = UDRIE1,
	TX_INT_ENABLE = TXCIE1,
	RX_INT_ENABLE = RXCIE1,
};

enum class ControlFlagsC1 {
	CLK_POLARITY = UCPOL1,
	CHAR_SIZE_0 = UCSZ10,
	CHAR_SIZE_1 = UCSZ11,
	STOP_BIT_SEL = USBS1,
	PARITY_MODE_0 = UPM10,
	PARITY_MODE_1 = UPM11,
	MODE_SEL_0 = UMSEL10,
	MODE_SEL_1 = UMSEL11,
};

// clang-format off
constexpr int operator<<(const int &lhs, const ControlFlagsA1 &rhs) { return lhs << static_cast<int>(rhs); }
constexpr int operator<<(const int &lhs, const ControlFlagsB1 &rhs) { return lhs << static_cast<int>(rhs); }
constexpr int operator<<(const int &lhs, const ControlFlagsC1 &rhs) { return lhs << static_cast<int>(rhs); }
// clang-format on

extern void (*fnRx1IntHandler)();
extern void (*fnDataReg1EmptyIntHandler)();

#define HAS_UART1

#else
#error "This chip is not supported"
#endif

} // namespace detail

#ifdef HAS_UART1

template <class cfg = Config<>, Driven driven = Driven::INTERRUPT, Mode mode = Mode::ASYNCHRONOUS>
class Hardware1 {
  public:
	using data_t = typename cfg::data_t;
	static constexpr auto DATA_BITS = cfg::DATA_BITS;

	static void init() FORCE_INLINE
	{
		HardwareImpl::init();
	}

	static void txByte(const data_t &byte) FORCE_INLINE
	{
		HardwareImpl::txByteBlocking(byte);
	}

	static bool rxByte(data_t &byte) FORCE_INLINE
	{
		return HardwareImpl::rxByteBlocking(byte);
	}

	static bool peek(data_t &byte) FORCE_INLINE
	{
		static_cast<void>(byte);
		static_assert(driven != Driven::BLOCKING, "Peek with data is not supported in blocking mode");
		return false;
	}

	static bool peek() FORCE_INLINE
	{
		return HardwareImpl::peekBlocking();
	}

	static void flushTx() FORCE_INLINE
	{
		while (!HardwareImpl::txEmpty())
			;
		while (!HardwareImpl::txComplete())
			;
		HardwareImpl::clearTxComplete();
	}

  private:
	using HardwareImpl = detail::Hardware<detail::Registers1, detail::ControlFlagsA1, detail::ControlFlagsB1,
	                                      detail::ControlFlagsC1, cfg, driven, mode>;
};

template <class cfg, Mode mode>
class Hardware1<cfg, Driven::INTERRUPT, mode> {
  public:
	using data_t = typename cfg::data_t;
	static constexpr auto DATA_BITS = cfg::DATA_BITS;

	static void init() FORCE_INLINE
	{
		detail::fnRx1IntHandler = rxIntHandler;
		detail::fnDataReg1EmptyIntHandler = dataRegEmptyIntHandler;

		HardwareImpl::init();
		sei();
	}

	static void txByte(const data_t &byte) FORCE_INLINE
	{
		uint8_t tmpHead = (sm_txBuf.head + 1) % TX_BUFFER_SIZE;
		while (tmpHead == sm_txBuf.tail)
			;

		sm_txBuf.buf[tmpHead] = byte;
		sm_txBuf.head = tmpHead;

		HardwareImpl::enableDataRegEmptyInt();
	}

	static bool rxByte(data_t &byte) FORCE_INLINE
	{
		if (sm_rxBuf.head == sm_rxBuf.tail)
			return false;

		uint8_t tmpTail = (sm_rxBuf.tail + 1) % RX_BUFFER_SIZE;
		byte = sm_rxBuf.buf[tmpTail];
		sm_rxBuf.tail = tmpTail;

		return true;
	}

	static bool peek(data_t &byte) FORCE_INLINE
	{
		if (sm_rxBuf.head == sm_rxBuf.tail)
			return false;

		uint8_t tmpTail = (sm_rxBuf.tail + 1) % RX_BUFFER_SIZE;
		byte = sm_rxBuf.buf[tmpTail];

		return true;
	}

	static bool peek() FORCE_INLINE
	{
		return (sm_rxBuf.head != sm_rxBuf.tail);
	}

	static void flushTx() FORCE_INLINE
	{
		while (sm_txBuf.head != sm_txBuf.tail)
			;
		while (!HardwareImpl::txEmpty())
			;
		while (!HardwareImpl::txComplete())
			;
		HardwareImpl::clearTxComplete();
	}

  private:
	using HardwareImpl = detail::Hardware<detail::Registers1, detail::ControlFlagsA1, detail::ControlFlagsB1,
	                                      detail::ControlFlagsC1, cfg, Driven::INTERRUPT, mode>;

	static constexpr auto TX_BUFFER_SIZE = 16;
	static constexpr auto RX_BUFFER_SIZE = 16;

	static volatile detail::RingBuffer<data_t, TX_BUFFER_SIZE> sm_txBuf;
	static volatile detail::RingBuffer<data_t, RX_BUFFER_SIZE> sm_rxBuf;

	static void rxIntHandler()
	{
		uint8_t tmpHead = (sm_rxBuf.head + 1) % RX_BUFFER_SIZE;

		if (tmpHead != sm_rxBuf.tail) {
			sm_rxBuf.head = tmpHead;
			sm_rxBuf.buf[tmpHead] = HardwareImpl::rxByteInterrupt();
		}
	}

	static void dataRegEmptyIntHandler() FORCE_INLINE
	{
		if (sm_txBuf.head != sm_txBuf.tail) {
			uint8_t tmpTail = (sm_txBuf.tail + 1) % TX_BUFFER_SIZE;
			sm_txBuf.tail = tmpTail;
			HardwareImpl::txByteInterrupt(sm_txBuf.buf[tmpTail]);
		} else
			HardwareImpl::disableDataRegEmptyInt();
	}
};

template <class cfg, Mode mode>
volatile detail::RingBuffer<typename Hardware1<cfg, Driven::INTERRUPT, mode>::data_t,
                            Hardware1<cfg, Driven::INTERRUPT, mode>::TX_BUFFER_SIZE>
    Hardware1<cfg, Driven::INTERRUPT, mode>::sm_txBuf = {0, 0, {0}};

template <class cfg, Mode mode>
volatile detail::RingBuffer<typename Hardware1<cfg, Driven::INTERRUPT, mode>::data_t,
                            Hardware1<cfg, Driven::INTERRUPT, mode>::RX_BUFFER_SIZE>
    Hardware1<cfg, Driven::INTERRUPT, mode>::sm_rxBuf = {0, 0, {0}};

#endif

} // namespace uart

#undef FORCE_INLINE