uart/hardware0.hpp

#pragma once

#include "config.hpp"

#define FORCE_INLINE __attribute__((always_inline))

namespace uart {

enum class Mode {
	ASYNCHRONOUS,
	ASYNCHRONOUS_2X,
	SYNCHRONOUS_MASTER,
	SYNCHRONOUS_SLAVE,
	SPI,
};

enum class Driven {
	INTERRUPT,
	BLOCKING,
};

namespace detail {

struct Registers0 {
};

enum class SupportedHardware {
	ATmega1284P,
};

template <SupportedHardware>
struct HardwareAbstraction {
};

template <>
struct HardwareAbstraction<SupportedHardware::ATmega1284P> {
	struct Reg0 {
		static constexpr volatile auto *ioReg = &UDR0;
		static constexpr volatile auto *controlStatusRegA = &UCSR0A;
		static constexpr volatile auto *controlStatusRegB = &UCSR0B;
		static constexpr volatile auto *controlStatusRegC = &UCSR0C;
		static constexpr volatile auto *baudRateRegL = &UBRR0L;
		static constexpr volatile auto *baudRateRegH = &UBRR0H;
	};

	struct Reg1 {
		static constexpr volatile auto *ioReg = &UDR1;
		static constexpr volatile auto *controlStatusRegA = &UCSR1A;
		static constexpr volatile auto *controlStatusRegB = &UCSR1B;
		static constexpr volatile auto *controlStatusRegC = &UCSR1C;
		static constexpr volatile auto *baudRateRegL = &UBRR1L;
		static constexpr volatile auto *baudRateRegH = &UBRR1H;
	};

	template <uint32_t baudRate>
	static constexpr auto calcBaud()
	{
		return static_cast<uint16_t>((F_CPU / (16 * baudRate)) - 1);
	}

	struct DataBitsVal {
		uint8_t ucsrcVal = 0;
		uint8_t ucsrbVal = 0;
	};

	template <DataBits dataBits>
	static constexpr auto calcDataBits()
	{
		DataBitsVal dataBitsVal;

		switch (dataBits) {
		case DataBits::FIVE:
			dataBitsVal.ucsrcVal = 0;
			break;
		case DataBits::SIX:
			dataBitsVal.ucsrcVal = (1 << UCSZ00);
			break;
		case DataBits::SEVEN:
			dataBitsVal.ucsrcVal = (1 << UCSZ01);
			break;
		case DataBits::EIGHT:
			dataBitsVal.ucsrcVal = (1 << UCSZ01) | (1 << UCSZ00);
			break;
		case DataBits::NINE:
			dataBitsVal.ucsrcVal = (1 << UCSZ01) | (1 << UCSZ00);
			dataBitsVal.ucsrbVal = (1 << UCSZ02);
			break;
		}

		return dataBitsVal;
	}

	template <Parity parity>
	static constexpr auto calcParity()
	{
		uint8_t parityVal = 0;

		if (parity == Parity::EVEN)
			parityVal = (1 << UPM01);
		else if (parity == Parity::ODD)
			parityVal = (1 << UPM01) | (1 << UPM00);

		return parityVal;
	}

	template <StopBits stopBits>
	static constexpr auto calcStopBits()
	{
		uint8_t stopBitsVal = 0;

		if (stopBits == StopBits::TWO)
			stopBitsVal = (1 << USBS0);

		return stopBitsVal;
	}

	template <Mode mode>
	static constexpr auto calcMode()
	{
		static_assert(mode != Mode::SPI, "SPI mode can not be used with uart");

		uint8_t modeVal = 0;

		if (mode == Mode::SYNCHRONOUS_MASTER || mode == Mode::SYNCHRONOUS_SLAVE) {
			modeVal = (1 << UMSEL00);
		}

		return modeVal;
	}

	template <bool enable>
	static constexpr auto calcRxState()
	{
		uint8_t enableVal = 0;

		if (enable)
			enableVal = (1 << RXEN0);

		return enableVal;
	}

	template <bool enable>
	static constexpr auto calcTxState()
	{
		uint8_t enableVal = 0;

		if (enable)
			enableVal = (1 << TXEN0);

		return enableVal;
	}

	static void setBaud(const uint16_t baudVal)
	{
		*Reg0::baudRateRegH = static_cast<uint8_t>(baudVal >> 8);
		*Reg0::baudRateRegL = static_cast<uint8_t>(baudVal);
	}

	template <uint8_t regVal>
	static void setControlRegA()
	{
		*Reg0::controlStatusRegA = regVal;
	}

	template <uint8_t regVal>
	static void setControlRegB()
	{
		*Reg0::controlStatusRegB = regVal;
	}

	template <uint8_t regVal>
	static void setControlRegC()
	{
		*Reg0::controlStatusRegC = regVal;
	}

	static void txByte(uint8_t byte) FORCE_INLINE
	{
		while (!(*Reg0::controlStatusRegA & (1 << UDRE0)))
			;

		*Reg0::ioReg = byte;
	}
};

static constexpr auto currentHardware = SupportedHardware::ATmega1284P;

} // namespace detail

template <Mode mode = Mode::ASYNCHRONOUS, class cfg = Config<>, Driven driven = Driven::INTERRUPT>
class Hardware0 {
  public:
	using data_t = typename cfg::data_t;
	static constexpr auto DATA_BITS = cfg::DATA_BITS;

	static void init()
	{
		detail::HardwareAbstraction<detail::currentHardware> hal;
		hal.setBaud(hal.calcBaud<BAUD_RATE>());

		constexpr auto dataBitsVal = hal.calcDataBits<DATA_BITS>();
		constexpr auto parityVal = hal.calcParity<PARITY>();
		constexpr auto stopBitsVal = hal.calcStopBits<STOP_BITS>();
		constexpr auto modeVal = hal.calcMode<mode>();
		constexpr auto enableRx = hal.calcRxState<true>();
		constexpr auto enableTx = hal.calcTxState<true>();

		constexpr uint8_t ucsr0b = dataBitsVal.ucsrbVal | enableRx | enableTx;
		constexpr uint8_t ucsr0c = dataBitsVal.ucsrcVal | parityVal | stopBitsVal | modeVal;

		hal.setControlRegB<ucsr0b>();
		hal.setControlRegC<ucsr0c>();
	}

	static void txByte(data_t byte) FORCE_INLINE
	{
		detail::HardwareAbstraction<detail::currentHardware> hal;
		hal.txByte(byte);
	}

	static data_t rxByte() {}

	static data_t peek() {}

  private:
	static constexpr auto BAUD_RATE = cfg::BAUD_RATE;
	static constexpr auto PARITY = cfg::PARITY;
	static constexpr auto STOP_BITS = cfg::STOP_BITS;
};

} // namespace uart

#undef FORCE_INLINE