avr/bootloader
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Files
7d046c3b8933f069b89d0903be032a66b2e2e005
bootloader/CMakeLists.txt
BlackMark 7d046c3b89 pureboot: PI lint, tightened gates, and the self-update test suite 
check_pi.py asserts the two link-time facts position independence rests on
(no absolute jmp/call; the info block within the image's first 256 bytes);
the size gates drop to 510 on the tinies for the trampoline word.

New per-chip tests beside the reworked protocol test: the planner units
(programming orders and their recovery properties, the surgery, staging
composition, boot-fuse decode, and the update preflight's error/warning
matrix over synthetic fuse bytes), the relocated-copy sweep (the identical
image installed one slot lower serves the full command set — the PI
acceptance test, and the one that caught the temporary-buffer trap), and
the self-update end-to-end: --update-loader to a re-timed build
(pureboot9, byte-different by PUREBOOT_TIMEOUT alone), then every
power-fail phase killed mid-write, restarted from the runner's flash dump,
and completed by a re-run with the application intact throughout. The mega
rounds run the BOOTRST-unprogrammed profile: the fixture application's 'L'
jump is the application-owned loader entry that profile relies on.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-20 19:37:57 +02:00

227 lines
11 KiB
CMake
Raw Blame History

cmake_minimum_required(VERSION 3.28)
project(tsb_libavr LANGUAGES CXX)
# libavr from a local checkout (LIBAVR_ROOT) or the forge; the toolchain file
# comes from the same checkout via CMakePresets.json.
include(FetchContent)
if(NOT LIBAVR_ROOT AND DEFINED ENV{LIBAVR_ROOT})
set(LIBAVR_ROOT $ENV{LIBAVR_ROOT})
endif()
if(LIBAVR_ROOT)
FetchContent_Declare(libavr SOURCE_DIR ${LIBAVR_ROOT})
else()
FetchContent_Declare(libavr GIT_REPOSITORY git@git.blackmark.me:avr/libavr.git GIT_TAG main)
endif()
FetchContent_MakeAvailable(libavr)
if(PROJECT_IS_TOP_LEVEL)
add_compile_options(-Werror) # warnings are errors for the port's own code
enable_testing()
# The behavioral tests drive the real wire protocols over a simavr pty
# (as the host tools do) and actually flash the device. The runners are
# host programs built at configure time against libsimavr; if they or
# Python are missing, only the size tests run.
find_program(_host_cc NAMES cc gcc)
find_package(Python3 COMPONENTS Interpreter)
if(_host_cc AND Python3_FOUND)
set(PB_DEVICE ${CMAKE_BINARY_DIR}/pureboot_device)
execute_process(
COMMAND ${_host_cc} -O2 -I/usr/include/simavr -I/usr/include/simavr/parts
-o ${PB_DEVICE} ${CMAKE_CURRENT_SOURCE_DIR}/test/pureboot_device.c
-lsimavr -lsimavrparts -lelf -lutil
RESULT_VARIABLE _pbdev_res ERROR_VARIABLE _pbdev_err)
if(NOT _pbdev_res EQUAL 0)
message(STATUS "pureboot_device not built (${_pbdev_err}) — protocol tests skipped")
unset(PB_DEVICE)
endif()
if(LIBAVR_MCU STREQUAL "atmega328p")
set(TSB_DEVICE ${CMAKE_BINARY_DIR}/tsb_device)
execute_process(
COMMAND ${_host_cc} -O2 -I/usr/include/simavr -I/usr/include/simavr/parts
-o ${TSB_DEVICE} ${CMAKE_CURRENT_SOURCE_DIR}/test/device.c
-lsimavr -lsimavrparts -lelf
RESULT_VARIABLE _dev_res ERROR_VARIABLE _dev_err)
if(NOT _dev_res EQUAL 0)
message(STATUS "tsb_device not built (${_dev_err}) — protocol tests skipped")
unset(TSB_DEVICE)
endif()
endif()
endif()
endif()
# The TinySafeBoot protocol reimplemented on libavr in three variants that trade
# clarity for size. Each links into the ATmega328P boot section (BOOTSZ selects
# its size; BOOTRST vectors a reset to its base) with -nostartfiles — a polled
# loader has no use for the crt or the vector table. The naked entry sits in
# .vectors, laid first, and runs. The boot base is FLASHEND+1 minus the section
# size; the linker section-start and the source's boot_bytes agree. tsb_app is
# the application's reset vector, pinned to 0 here so the loaders jump to a
# named function; --pmem-wrap-around lets relaxation turn that absolute jump
# into the wrapped rjmp AVR's modulo-flash PC actually executes.
# All three implement the full oracle feature set (see oracle/README.md):
# watchdog bail, one-wire half-duplex, config-page activation timeout, password
# gate, emergency erase, config/flash/EEPROM read-write. They differ only in how,
# and the size gradient is the cost of that "how" — see dev/lessons.md.
# tsb_asm — the tricks tier's C++ with exactly two routines in asm (the
# bounded rx and the page-store loop — the two whose remaining
# cost is the C ABI itself): 510 B in the 512 B section the
# hand-written 500 B oracle occupies. Everything else, from
# bring-up to dispatch, is C++ on libavr.
# tsb_tricks — no asm at all: the whole-loader register allocation lives in
# global register variables (Y walks the page pointer), every
# helper is a tiny noinline primitive placed by the
# global-register store rules, pages stream straight to
# SPM/EEPROM, and the bring-up is the two reset-non-default
# registers only. 526 B in the 1 KB section (BOOTSZ=10) — 14
# over the oracle's section, from 168 over at this tier's first
# floor.
# tsb_pure — pure idiomatic libavr, one function per command, TU-local
# (internal linkage), streaming (no SRAM page buffer): 836 B in
# the 1 KB section.
#
# add_tsb_variant(<name> <boot-section-bytes>)
function(add_tsb_variant name bytes)
math(EXPR base_dec "32768 - ${bytes}")
math(EXPR base_hex "${base_dec}" OUTPUT_FORMAT HEXADECIMAL)
add_executable(${name} tsb/${name}.cpp)
target_link_libraries(${name} PRIVATE libavr)
target_link_options(${name} PRIVATE -nostartfiles -Wl,--section-start=.text=${base_hex}
-Wl,--defsym=tsb_app=0 -Wl,--pmem-wrap-around=32k)
add_custom_command(TARGET ${name} POST_BUILD COMMAND ${CMAKE_SIZE} $<TARGET_FILE:${name}>)
if(PROJECT_IS_TOP_LEVEL)
add_test(NAME ${name}.size
COMMAND ${CMAKE_COMMAND} -DSIZE_TOOL=${CMAKE_SIZE} -DELF=$<TARGET_FILE:${name}>
-DLIMIT=${bytes} -P ${CMAKE_CURRENT_SOURCE_DIR}/test/check_size.cmake)
if(DEFINED TSB_DEVICE)
add_test(NAME ${name}.protocol
COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/test/tsbtest.py
${TSB_DEVICE} $<TARGET_FILE:${name}> ${base_hex})
endif()
endif()
endfunction()
# The tsb tiers reimplement the ATmega328P-only reference protocol; the other
# chips build pureboot alone.
if(LIBAVR_MCU STREQUAL "atmega328p")
add_tsb_variant(tsb_asm 512)
add_tsb_variant(tsb_pure 1024)
add_tsb_variant(tsb_tricks 1024)
endif()
# pureboot — the pure-constraint port (see pureboot/README.md): one source,
# no inline assembly, no global register variables, every libavr chip, 512
# bytes each. The loader owns the top 512 bytes of flash on every chip; the
# application entry symbol is address 0 on the mega (reset re-vectors to the
# loader through BOOTRST, so word 0 stays the application's own vector) and
# the trampoline word just below the loader on the tinies (host-side vector
# surgery points it at the application). --pmem-wrap-around models AVR's
# modulo-flash PC where the flash is big enough to need it.
#
# The image is position-independent (check_pi.py asserts the two link-time
# facts that make it so), and on the tinies its budget is 510, not 512: the
# slot's last word is the trampoline the host composes — the resident slot's
# holds the application entry, and a staging copy's holds the jump through
# which it reaches the loader it installed. The activation window is a
# compile-time constant; a different PUREBOOT_TIMEOUT builds the re-timed
# binary a self-update then installs.
set(PUREBOOT_TIMEOUT 8 CACHE STRING "pureboot activation window, seconds")
if(LIBAVR_MCU STREQUAL "attiny13a")
set(_pb_flash 1024)
set(_pb_wrap "")
set(_pb_page 32)
set(_pb_hz 9600000)
set(_pb_baud 57600)
set(_pb_eeprom 64)
set(_pb_limit 510)
elseif(LIBAVR_MCU STREQUAL "attiny85")
set(_pb_flash 8192)
set(_pb_wrap -Wl,--pmem-wrap-around=8k)
set(_pb_page 64)
set(_pb_hz 8000000)
set(_pb_baud 57600)
set(_pb_eeprom 512)
set(_pb_limit 510)
else()
set(_pb_flash 32768)
set(_pb_wrap -Wl,--pmem-wrap-around=32k)
set(_pb_page 128)
set(_pb_hz 16000000)
set(_pb_baud 115200)
set(_pb_eeprom 1024)
set(_pb_limit 512)
endif()
math(EXPR _pb_base "${_pb_flash} - 512")
math(EXPR _pb_base_hex "${_pb_base}" OUTPUT_FORMAT HEXADECIMAL)
if(LIBAVR_MCU STREQUAL "atmega328p")
set(_pb_app 0)
else()
math(EXPR _pb_app "${_pb_base} - 2")
endif()
add_executable(pureboot pureboot/pureboot.cpp)
target_link_libraries(pureboot PRIVATE libavr)
target_compile_definitions(pureboot PRIVATE PUREBOOT_TIMEOUT=${PUREBOOT_TIMEOUT})
target_link_options(pureboot PRIVATE -nostartfiles -Wl,--section-start=.text=${_pb_base_hex}
-Wl,--defsym=pureboot_app=${_pb_app} ${_pb_wrap})
add_custom_command(TARGET pureboot POST_BUILD COMMAND ${CMAKE_SIZE} $<TARGET_FILE:pureboot>)
if(PROJECT_IS_TOP_LEVEL)
add_test(NAME pureboot.size
COMMAND ${CMAKE_COMMAND} -DSIZE_TOOL=${CMAKE_SIZE} -DELF=$<TARGET_FILE:pureboot>
-DLIMIT=${_pb_limit} -P ${CMAKE_CURRENT_SOURCE_DIR}/test/check_size.cmake)
if(Python3_FOUND)
add_test(NAME pureboot.pi
COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/test/check_pi.py
${CMAKE_OBJDUMP} ${CMAKE_NM} $<TARGET_FILE:pureboot> ${_pb_base_hex})
add_test(NAME pureboot.planner
COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/test/test_planner.py
${CMAKE_CURRENT_SOURCE_DIR}/pureboot/pureboot.py)
endif()
# The protocol test flashes this fixture through the loader with the real
# host tool and expects its banner after the hand-over; a normally linked
# application whose reset vector is what the tinies' surgery re-homes.
if(DEFINED PB_DEVICE)
add_executable(pbapp test/pbapp.cpp)
target_link_libraries(pbapp PRIVATE libavr)
add_custom_command(TARGET pbapp POST_BUILD
COMMAND ${CMAKE_OBJCOPY} -O binary $<TARGET_FILE:pbapp> $<TARGET_FILE:pbapp>.bin)
add_test(NAME pureboot.protocol
COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/test/pbtest.py
${PB_DEVICE} $<TARGET_FILE:pureboot> ${LIBAVR_MCU} ${_pb_hz} ${_pb_base_hex}
${_pb_page} ${_pb_baud} ${_pb_eeprom} $<TARGET_FILE:pbapp>.bin
${CMAKE_CURRENT_SOURCE_DIR}/pureboot/pureboot.py
${CMAKE_BINARY_DIR}/pbtest-work)
set_tests_properties(pureboot.protocol PROPERTIES TIMEOUT 180)
# The position-independence acceptance test: the identical image,
# installed one slot lower, must serve the full command set.
add_test(NAME pureboot.reloc
COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/test/pbreloc.py
${PB_DEVICE} $<TARGET_FILE:pureboot> ${LIBAVR_MCU} ${_pb_hz} ${_pb_base_hex}
${_pb_page} ${_pb_baud} ${CMAKE_CURRENT_SOURCE_DIR}/pureboot/pureboot.py
${CMAKE_BINARY_DIR}/pbreloc-work)
set_tests_properties(pureboot.reloc PROPERTIES TIMEOUT 180
ENVIRONMENT "PB_OBJCOPY=${CMAKE_OBJCOPY}")
# The self-update end-to-end: the re-timed build (same source, only
# PUREBOOT_TIMEOUT differs — a byte-different image) replaces the
# resident through --update-loader, with every power-fail phase
# rehearsed from the runner's flash dumps.
add_executable(pureboot9 pureboot/pureboot.cpp)
target_link_libraries(pureboot9 PRIVATE libavr)
target_compile_definitions(pureboot9 PRIVATE PUREBOOT_TIMEOUT=9)
target_link_options(pureboot9 PRIVATE -nostartfiles -Wl,--section-start=.text=${_pb_base_hex}
-Wl,--defsym=pureboot_app=${_pb_app} ${_pb_wrap})
add_test(NAME pureboot.update
COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/test/pbupdate.py
${PB_DEVICE} $<TARGET_FILE:pureboot> $<TARGET_FILE:pureboot9> ${LIBAVR_MCU}
${_pb_hz} ${_pb_base_hex} ${_pb_page} ${_pb_baud} $<TARGET_FILE:pbapp>.bin
${CMAKE_CURRENT_SOURCE_DIR}/pureboot/pureboot.py
${CMAKE_BINARY_DIR}/pbupdate-work)
set_tests_properties(pureboot.update PROPERTIES TIMEOUT 600
ENVIRONMENT "PB_OBJCOPY=${CMAKE_OBJCOPY}")
endif()
endif()
Reference in New Issue View Git Blame Copy Permalink