avr/bootloader
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

pureboot v8: one-wire on every backend

Browse Source 
HALF_DUPLEX deploys a shared line per backend. The hardware USART takes
the library's .half_duplex turn-around — RXD and TXD tied off-chip, each
reply byte held to transmit-complete before the line can be released
(m8 404 B, m328P 440, 1284P 460; the window poll runs through the
outlined release-line call at 18 or 22 cycles a poll, measured off the
built loops and held per chip by pureboot.window.halfduplex). The
software and autobaud links fold onto the RX pin — RX == TX spells the
same — and cost nothing: the frame's direction wrap is what the dropped
second-pin init paid, and the worst image in the space is unchanged at
the 1284s' 502 of 512, now with its one-wire twin proven equal across
the exhaustive matrix. The host gains --one-wire, the echo discard a
shared line requires: the adapter's echo is matched byte for byte and a
reply interleaving a blind write — a loader already in session
re-prompts inside the knock — is held for the reader. The device runner
models the shared line by direction (drives only while the firmware's
DDR reads input, decodes only while the firmware owns it, supplies the
host-side echo), extends the USART pin-ownership model to RXEN's hold
on RXD, and starts the pty USART from the datasheet's zeroed UCSR#B:
simavr's TXEN-set reset plus its clear-UDRE-on-TXEN-drop otherwise
wedges the first transmitter after a receiver-only program, which the
half-duplex window gate caught as a banner that never came. v7 is
tagged at its era's last commit; v8 changes nothing on the wire.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
This commit is contained in:
BlackMark
2026-07-31 02:32:11 +02:00
parent 47419400f6
commit f71d76a815
13 changed files with 507 additions and 50 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
test/pbapp.cpp
View File

@@ -41,6 +41,9 @@ consteval avr::hertz_t clock()
#if !defined(PUREBOOT_TX)
#define PUREBOOT_TX pb1
#endif
#if !defined(PUREBOOT_RX)
#define PUREBOOT_RX pb0
#endif
#if !defined(PUREBOOT_USART)
#define PUREBOOT_USART 0
#endif
@@ -64,6 +67,10 @@ struct link {
static constexpr avr::baud_t baud{115200};
#endif
using tx_t = avr::uart::usart<PUREBOOT_USART, C, {.baud = baud, .max_baud_error = 2.5_pct}>;
static void init()
{
avr::init<tx_t>();
}
static void tx(char c)
{
tx_t::write(static_cast<std::uint8_t>(c));
@@ -110,7 +117,21 @@ struct link<C, false> {
#else
static constexpr avr::baud_t baud{57600};
#endif
using tx_t = avr::uart::software_tx<C, avr::PUREBOOT_TX, baud>;
// A shared-pin deployment (RX == TX) banners as a guest on its own line:
// the pull-up input is the released line, the transmitter takes the pin
// for exactly one frame per byte — the shape a real one-wire application
// beside this loader uses.
static constexpr bool one_wire = avr::PUREBOOT_RX == avr::PUREBOOT_TX;
using tx_t = avr::uart::software_tx<C, avr::PUREBOOT_TX, baud, one_wire>;
static void init()
{
// The guest transmitter configures no pin; the released line — the
// pull-up input a receiver would own — is established here.
if constexpr (one_wire)
avr::init<avr::io::input<avr::PUREBOOT_TX, avr::io::pull::up>, tx_t>();
else
avr::init<tx_t>();
}
static void tx(char c)
{
tx_t::write(static_cast<std::uint8_t>(c));
@@ -145,7 +166,7 @@ struct link<C, false> {
int main()
{
avr::init<typename link<dev::clock>::tx_t>();
link<dev::clock>::init();
#if !defined(PUREBOOT_HANDOVER)
link<dev::clock>::tx('A');
link<dev::clock>::tx('P');