Games that ClipCursor / re-center via SetCursorPos while focused trap the operator's
mouse (the focus spoof makes them think they're always focused), so the operator
can't reach the overlay. The Focus subsystem now inline-hooks ClipCursor and
SetCursorPos (stdcall trampolines): while "release" is requested it forces
ClipCursor(NULL) and swallows the re-centering SetCursorPos; otherwise it passes them
through. It frees any existing clip at install and re-frees each worker tick (covers
one-time clippers and a runtime clip->release toggle).
Host: protocol v10->v11 adds HookControl::allow_cursor_clip (0 = release, the
default). The Injection panel gets a "Release operator cursor" checkbox and an F2
hotkey (InjectionPanel::toggle_cursor_release); default released, since the guest
plays via the pad so the game's clip is operator-only.
Verified: full build x64 + x86 clean; ctest x64 9/9, x86 3/3. The cursor behavior
against a real clipping game (Trails through Daybreak) needs a live injected session
to confirm; logic reviewed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Makes it possible to isolate an input->tool problem from a tool->game one in the
Controllers panel (under Debug details):
- which backend fed each slot is already shown via the per-pad source tag
("XInput #0" / "Steam Input") in the Incoming section;
- a new "Round-trip" table shows, per slot, the state we forwarded (the active
backend's pad) next to what the game actually read back, highlighting matches.
For the round-trip, the XInput hook now echoes the state it returns to the game into
the status (protocol v9->v10: per-slot read_state in HookStatus).
Verified: hook_selftest (x64 + x86) asserts the hook records the game-read state;
full build x64 + x86 clean; ctest x64 9/9, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The XInput hook used to swallow XInputSetState; now it records the requested
left/right motor speeds into the status back-channel (protocol v8->v9: per-slot
rumble_left/right in HookStatus). Each frame the host reads them and, only on
change, drives the guest's actuator via the active backend:
- XInput: XInputSetState on the guest's slot (the open question is whether Steam's
RPT virtual pad accepts vibration and routes it to the guest -- needs live RPT);
- Steam Input: SteamInput TriggerVibration on the slot's controller handle, with the
XInput fallback for slots Steam isn't driving.
InputSource gains a set_rumble(slot,left,right) hook (default no-op) implemented by
both backends; SteamInputSource now tracks per-slot controller handles + which slots
it drives.
Verified: hook_selftest (x64 + x86) now asserts the hook records the rumble from
XInputSetState into the status; full build x64 + x86 clean; ctest x64 9/9, x86 3/3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Forward the host window's clicks and keystrokes into the injected game so guests
can drive menus / "Press Start" / text entry that a pad can't.
Protocol (v7->v8): new HookSubsys_Mkb and an SPSC MkbRing of MkbEvents in
SharedBlock (host produces, hook consumes); push/pop helpers.
Hook (hook/src/mkb_hook.cpp, new subsystem): a worker-loop pump drains the ring at
~5 ms and PostMessageW's the matching window messages (WM_KEY*/WM_CHAR, mouse
buttons, WM_MOUSEWHEEL) to the game's main window; it also inline-hooks user32
GetAsyncKeyState / GetKeyboardState / GetCursorPos (stdcall trampolines per the x86
rule) to report a synthesized state so polling games react too. Removing the
subsystem clears all synthesized keys (no stuck input).
Host: the Injection panel gets a "Mouse + keyboard forwarding" subsystem toggle
(opt-in, default off -- the toggle is the hook). host/src/inject/mkb_forward.cpp
reads ImGui IO each frame and forwards only when the host window is focused and
ImGui isn't capturing the event; keyboard always, mouse only while mirroring (clicks
+ wheel, not movement). Mouse coords are mapped through the letterbox to game-client
space (host/src/inject/mkb_map.hpp), accounting for WGC-of-decorated-window vs
hooked/borderless. RawInput/DirectInput games are out of scope for this version.
Verified: new mkb_ring_test + mkb_map_test pass; full build x64 + x86 clean; ctest
x64 9/9 and x86 3/3 green (no regression from the protocol bump). The subsystem is
opt-in, so it can't affect existing behavior unless enabled; the end-to-end
click-into-game path needs live Remote Play + a real game to confirm.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add an injected IDXGISwapChain::Present / Present1 hook as a lower-latency,
border-free alternative to WGC. The hook copies the swapchain backbuffer into a
shared keyed-mutex texture (coop_video_<pid>); the host opens it by name and
samples it. New opt-in HookSubsys_Video (protocol v6 -> v7); the Video mirror
panel gains a WGC vs Hooked source toggle that installs/removes the subsystem.
Verified by present_hook_test (drives a real D3D11 swapchain end-to-end and reads
the rendered pixels back through the shared texture) and against Phantom Brave
(D3D9: hook installs cleanly and stays idle, WGC fallback). All 5 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a host->hook control channel (protocol v5 -> v6: HookControl in SharedBlock,
per-subsystem "disabled" flags, 0 = install so the zero-filled default is
unchanged). The worker now reconciles each subsystem every tick: install what's
requested-and-missing, remove what's no longer wanted -- so the audio hooks
re-attach the ring and republish format on a reinstall, and XInput/focus clear
their stale status flags on removal.
Injection panel: a checkbox per subsystem (input forwarding / focus spoof /
audio render-hook) toggles it at runtime, showing the requested vs actual
installed state from the registry, plus DLL heartbeat liveness. The hook-status
section now keys off whether a DLL was injected (host-side) rather than the
input-hook "attached" flag, so it stays visible with input unhooked.
Guards for dependent features: the synthetic-input control is disabled when
input forwarding is off, and the Audio panel explains that mirroring uses
loopback (echo) when the render-hook is off.
Verified against Phantom Brave via coop_audio_probe: starting with audio
requested off installs only input+focus (8 hooks, no capture); re-enabling at
runtime installs the audio hooks (13) and capture starts immediately. All four
tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a process-wide hook registry (hook/src/hook_registry) that every hook
module registers its hooks with and bumps a counter from each detour. The
XInput, focus-spoof, and audio render-hooks now register their individual
hooks (XInputGetState/Ex/Caps/SetState; GetForegroundWindow/GetActiveWindow/
GetFocus/WndProc guard; IMMDevice::Activate, IAudioClient::Initialize/
GetService, IAudioRenderClient::GetBuffer/ReleaseBuffer) and count calls.
The worker publishes the table to the host each tick over a new HookStatus
field (protocol v4 -> v5: HookEntry[] + count). The Injection panel shows it
as a collapsible table grouped by subsystem with an installed flag and call
count per hook; coop_audio_probe prints the same table headless.
Verified against Phantom Brave: 13 hooks listed with live counts (focus APIs
polled heavily, GetBuffer/ReleaseBuffer ticking with the audio render loop).
All four tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Implements the WASAPI render-hook (hook/src/audio_hook.{hpp,cpp}) and an
in-process self-test that proves COM vtable discovery and GetBuffer/ReleaseBuffer
interception with no game and no second Steam account.
- audio_hook.cpp: anchors on IMMDevice::Activate (idx 3) off our own default
endpoint (shared vtable), then hooks IAudioClient::Initialize (3) /
GetService (14) and IAudioRenderClient::GetBuffer (3) / ReleaseBuffer (4) off
live game pointers. Copies primary-stream frames into the audio ring and
releases with AUDCLNT_BUFFERFLAGS_SILENT (+ memset belt-and-suspenders), only
while the host-owned capture_enabled flag is set. Stream counting runs always;
on a ring overrun it keeps playing locally rather than going silent.
- ipc_client.hpp: publish_audio_stream / note_audio_frames /
set_audio_streams_seen write the render-stream debug fields into HookStatus.
- tests/audio_hook_test.cpp: installs the hooks, renders a tone through WASAPI
in-process, and asserts exactly one stream, frames pushed to the ring, the
ring carries the non-silent tone, and the primary was silenced. PASS:
streams_seen=1, frames_captured=32640.
- plan doc: correct GetService vtable index 13 -> 14 (SetEventHandle is 13).
coop_hook DLL wiring + host consumer/fallback come next (M3).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Surfaced by a game (Life is Strange: Before the Storm) that ignores
controller input when it lacks true OS focus even though it still polls
XInput. To find the focus-gated detection path, instrument the hook.
Protocol v3 status back-channel now reports:
- per-slot XInputGetState and XInputGetCapabilities counters (replacing the
single aggregate), so the overlay shows exactly which slots the game polls
and how fast;
- focus-API call counts (GetForegroundWindow/GetActiveWindow/GetFocus) to see
whether the game consults the APIs we spoof;
- input-path diagnostics: whether the process registered Raw Input for a
gamepad usage and whether it set RIDEV_INPUTSINK (background delivery), and
whether a DirectInput dll is loaded.
Host overlay gains a per-slot poll table and an "Input path" section. The DLL
refreshes input diagnostics each worker tick via GetRegisteredRawInputDevices.
hook_selftest updated for per-slot counters; passes.
This is diagnostic-only: once a real run shows which path LiS uses, the
targeted focus fix (e.g. forcing RIDEV_INPUTSINK or DI background coop) follows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two problems surfaced in testing: (1) no way to tell whether the injected
hook was actually the input source, and (2) the final design needs the tool
window focused for Steam RPT capture, which would pause/silence games that
react to focus loss. Both are addressed here.
- Focus spoofing (hook/focus_spoof): find the game's main window, subclass it
to rewrite/swallow WM_ACTIVATE/ACTIVATEAPP/NCACTIVATE/KILLFOCUS, and inline-
hook GetForegroundWindow/GetActiveWindow/GetFocus to always report the game
as active. The game keeps running and polling while unfocused.
- Status back-channel (protocol v2): the DLL reports attached/focus-spoof
flags, game pid/hwnd, a heartbeat, and a cumulative XInputGetState counter.
The host overlay turns the counter into a live poll rate, so "is the hook
working" is directly observable.
- Synthetic test-input toggle in the host: forwards a known automated pattern
(stick circle + periodic A) to prove forwarding independent of the physical
pad.
- hook_selftest extended to assert the status channel; passes.
Documented the windowed/borderless requirement and the new observable test
flow in the README.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The host can now inject coop_hook.dll into a running game and forward
controller state to it over shared memory, so the game reads the host's
(eventually the guest's) input and nothing else.
- hook/: coop_hook.dll. DllMain spawns a worker that opens the shared-memory
channel (named by the game's pid) and installs SafetyHook inline hooks on
XInputGetState/GetStateEx/GetCapabilities/SetState. Detours synthesize state
from shared memory; unmanaged slots report disconnected, hiding physical pads.
- host/: process picker (Toolhelp32), CreateRemoteThread(LoadLibraryW) injector
with an IsWow64Process2 bitness guard, IPC server publishing pads each frame,
and an ImGui Injection panel wiring it together.
- tests/: hook_selftest exercises the IPC seqlock + hook detours in-process
(no game/controller needed); passes.
Build: SafetyHook wired in (COOP_BUILD_HOOK=ON), Zydis via FetchContent.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
