BlackMark/AdaptiveBrightness
1
0
Fork 0
Code Issues Pull Requests Releases 5 Wiki Activity

Add watch dog timer

Browse Source
This commit is contained in:
BlackMark 2020-07-09 19:40:16 +02:00
parent 7a087c918e
commit 8e15ee72f3
9 changed files with 642 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
firmware/.mxproject
View File

File diff suppressed because one or more lines are too long

28
firmware/AdaptiveBrightnessFirmware.ioc
View File

@ -6,19 +6,21 @@ GPIO.groupedBy=Group By Peripherals
KeepUserPlacement=false KeepUserPlacement=false
Mcu.Family=STM32F0 Mcu.Family=STM32F0
Mcu.IP0=ADC Mcu.IP0=ADC
Mcu.IP1=NVIC Mcu.IP1=IWDG
Mcu.IP2=RCC Mcu.IP2=NVIC
Mcu.IP3=SYS Mcu.IP3=RCC
Mcu.IP4=USB Mcu.IP4=SYS
Mcu.IP5=USB_DEVICE Mcu.IP5=USB
Mcu.IPNb=6 Mcu.IP6=USB_DEVICE
Mcu.IPNb=7
Mcu.Name=STM32F042K(4-6)Tx Mcu.Name=STM32F042K(4-6)Tx
Mcu.Package=LQFP32 Mcu.Package=LQFP32
Mcu.Pin0=PA0 Mcu.Pin0=PA0
Mcu.Pin1=PA1 Mcu.Pin1=PA1
Mcu.Pin10=PB8 Mcu.Pin10=PB8
Mcu.Pin11=VP_SYS_VS_Systick Mcu.Pin11=VP_IWDG_VS_IWDG
Mcu.Pin12=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS Mcu.Pin12=VP_SYS_VS_Systick
Mcu.Pin13=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
Mcu.Pin2=PA2 Mcu.Pin2=PA2
Mcu.Pin3=PA7 Mcu.Pin3=PA7
Mcu.Pin4=PB0 Mcu.Pin4=PB0
@ -27,7 +29,7 @@ Mcu.Pin6=PA11
Mcu.Pin7=PA12 Mcu.Pin7=PA12
Mcu.Pin8=PA13 Mcu.Pin8=PA13
Mcu.Pin9=PA14 Mcu.Pin9=PA14
Mcu.PinsNb=13 Mcu.PinsNb=14
Mcu.ThirdPartyNb=0 Mcu.ThirdPartyNb=0
Mcu.UserConstants= Mcu.UserConstants=
Mcu.UserName=STM32F042K6Tx Mcu.UserName=STM32F042K6Tx
@ -87,13 +89,13 @@ ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=true ProjectManager.CoupleFile=true
ProjectManager.CustomerFirmwarePackage= ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true ProjectManager.DeletePrevious=false
ProjectManager.DeviceId=STM32F042K6Tx ProjectManager.DeviceId=STM32F042K6Tx
ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.0 ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.0
ProjectManager.FreePins=false ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x000 ProjectManager.HeapSize=0x000
ProjectManager.KeepUserCode=false ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=1 ProjectManager.LibraryCopy=1
ProjectManager.MainLocation=Src ProjectManager.MainLocation=Src
@ -106,7 +108,7 @@ ProjectManager.StackSize=0x700
ProjectManager.TargetToolchain=Makefile ProjectManager.TargetToolchain=Makefile
ProjectManager.ToolChainLocation= ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_ADC_Init-ADC-false-HAL-true,4-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_ADC_Init-ADC-false-HAL-true,4-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false,5-MX_IWDG_Init-IWDG-false-HAL-true
RCC.AHBFreq_Value=48000000 RCC.AHBFreq_Value=48000000
RCC.APB1Freq_Value=48000000 RCC.APB1Freq_Value=48000000
RCC.APB1TimFreq_Value=48000000 RCC.APB1TimFreq_Value=48000000
@ -132,6 +134,8 @@ USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS,PRODUCT_STRING_C
USB_DEVICE.PRODUCT_STRING_CDC_FS=AdaptiveBrightness USB_DEVICE.PRODUCT_STRING_CDC_FS=AdaptiveBrightness
USB_DEVICE.VirtualMode=Cdc USB_DEVICE.VirtualMode=Cdc
USB_DEVICE.VirtualModeFS=Cdc_FS USB_DEVICE.VirtualModeFS=Cdc_FS
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS

242
firmware/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_iwdg.h Normal file
View File

@ -0,0 +1,242 @@
/**
******************************************************************************
* @file stm32f0xx_hal_iwdg.h
* @author MCD Application Team
* @brief Header file of IWDG HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F0xx_HAL_IWDG_H
#define STM32F0xx_HAL_IWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @defgroup IWDG IWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup IWDG_Exported_Types IWDG Exported Types
* @{
*/
/**
* @brief IWDG Init structure definition
*/
typedef struct
{
uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
This parameter can be a value of @ref IWDG_Prescaler */
uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
uint32_t Window; /*!< Specifies the window value to be compared to the down-counter.
This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
} IWDG_InitTypeDef;
/**
* @brief IWDG Handle Structure definition
*/
typedef struct
{
IWDG_TypeDef *Instance; /*!< Register base address */
IWDG_InitTypeDef Init; /*!< IWDG required parameters */
} IWDG_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
* @{
*/
/** @defgroup IWDG_Prescaler IWDG Prescaler
* @{
*/
#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */
#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
/**
* @}
*/
/** @defgroup IWDG_Window_option IWDG Window option
* @{
*/
#define IWDG_WINDOW_DISABLE IWDG_WINR_WIN
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
* @{
*/
/**
* @brief Enable the IWDG peripheral.
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
/**
* @brief Reload IWDG counter with value defined in the reload register
* (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled).
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
* @{
*/
/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
* @{
*/
/* Initialization/Start functions ********************************************/
HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
* @{
*/
/* I/O operation functions ****************************************************/
HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup IWDG_Private_Constants IWDG Private Constants
* @{
*/
/**
* @brief IWDG Key Register BitMask
*/
#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */
#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */
#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */
#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup IWDG_Private_Macros IWDG Private Macros
* @{
*/
/**
* @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
/**
* @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
* @param __HANDLE__ IWDG handle
* @retval None
*/
#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
/**
* @brief Check IWDG prescaler value.
* @param __PRESCALER__ IWDG prescaler value
* @retval None
*/
#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
((__PRESCALER__) == IWDG_PRESCALER_8) || \
((__PRESCALER__) == IWDG_PRESCALER_16) || \
((__PRESCALER__) == IWDG_PRESCALER_32) || \
((__PRESCALER__) == IWDG_PRESCALER_64) || \
((__PRESCALER__) == IWDG_PRESCALER_128)|| \
((__PRESCALER__) == IWDG_PRESCALER_256))
/**
* @brief Check IWDG reload value.
* @param __RELOAD__ IWDG reload value
* @retval None
*/
#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
/**
* @brief Check IWDG window value.
* @param __WINDOW__ IWDG window value
* @retval None
*/
#define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN)
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F0xx_HAL_IWDG_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

264
firmware/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c Normal file
View File

@ -0,0 +1,264 @@
/**
******************************************************************************
* @file stm32f0xx_hal_iwdg.c
* @author MCD Application Team
* @brief IWDG HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Independent Watchdog (IWDG) peripheral:
* + Initialization and Start functions
* + IO operation functions
*
@verbatim
==============================================================================
##### IWDG Generic features #####
==============================================================================
[..]
(+) The IWDG can be started by either software or hardware (configurable
through option byte).
(+) The IWDG is clocked by Low-Speed clock (LSI) and thus stays active even
if the main clock fails.
(+) Once the IWDG is started, the LSI is forced ON and both can not be
disabled. The counter starts counting down from the reset value (0xFFF).
When it reaches the end of count value (0x000) a reset signal is
generated (IWDG reset).
(+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register,
the IWDG_RLR value is reloaded in the counter and the watchdog reset is
prevented.
(+) The IWDG is implemented in the VDD voltage domain that is still functional
in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
reset occurs.
(+) Debug mode : When the microcontroller enters debug mode (core halted),
the IWDG counter either continues to work normally or stops, depending
on DBG_IWDG_STOP configuration bit in DBG module, accessible through
__HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros.
[..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
The IWDG timeout may vary due to LSI frequency dispersion. STM32F0xx
devices provide the capability to measure the LSI frequency (LSI clock
connected internally to TIM16 CH1 input capture). The measured value
can be used to have an IWDG timeout with an acceptable accuracy.
##### How to use this driver #####
==============================================================================
[..]
(#) Use IWDG using HAL_IWDG_Init() function to :
(++) Enable instance by writing Start keyword in IWDG_KEY register. LSI
clock is forced ON and IWDG counter starts counting down.
(++) Enable write access to configuration registers:
IWDG_PR, IWDG_RLR and IWDG_WINR.
(++) Configure the IWDG prescaler and counter reload value. This reload
value will be loaded in the IWDG counter each time the watchdog is
reloaded, then the IWDG will start counting down from this value.
(++) Wait for status flags to be reset.
(++) Depending on window parameter:
(+++) If Window Init parameter is same as Window register value,
nothing more is done but reload counter value in order to exit
function with exact time base.
(+++) Else modify Window register. This will automatically reload
watchdog counter.
(#) Then the application program must refresh the IWDG counter at regular
intervals during normal operation to prevent an MCU reset, using
HAL_IWDG_Refresh() function.
*** IWDG HAL driver macros list ***
====================================
[..]
Below the list of most used macros in IWDG HAL driver:
(+) __HAL_IWDG_START: Enable the IWDG peripheral
(+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in
the reload register
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
#ifdef HAL_IWDG_MODULE_ENABLED
/** @addtogroup IWDG
* @brief IWDG HAL module driver.
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup IWDG_Private_Defines IWDG Private Defines
* @{
*/
/* Status register need 5 RC LSI divided by prescaler clock to be updated. With
higher prescaler (256), and according to LSI variation, we need to wait at
least 6 cycles so 48 ms. */
#define HAL_IWDG_DEFAULT_TIMEOUT 48u
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup IWDG_Exported_Functions
* @{
*/
/** @addtogroup IWDG_Exported_Functions_Group1
* @brief Initialization and Start functions.
*
@verbatim
===============================================================================
##### Initialization and Start functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize the IWDG according to the specified parameters in the
IWDG_InitTypeDef of associated handle.
(+) Manage Window option.
(+) Once initialization is performed in HAL_IWDG_Init function, Watchdog
is reloaded in order to exit function with correct time base.
@endverbatim
* @{
*/
/**
* @brief Initialize the IWDG according to the specified parameters in the
* IWDG_InitTypeDef and start watchdog. Before exiting function,
* watchdog is refreshed in order to have correct time base.
* @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
* the configuration information for the specified IWDG module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
{
uint32_t tickstart;
/* Check the IWDG handle allocation */
if (hiwdg == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window));
/* Enable IWDG. LSI is turned on automatically */
__HAL_IWDG_START(hiwdg);
/* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers by writing
0x5555 in KR */
IWDG_ENABLE_WRITE_ACCESS(hiwdg);
/* Write to IWDG registers the Prescaler & Reload values to work with */
hiwdg->Instance->PR = hiwdg->Init.Prescaler;
hiwdg->Instance->RLR = hiwdg->Init.Reload;
/* Check pending flag, if previous update not done, return timeout */
tickstart = HAL_GetTick();
/* Wait for register to be updated */
while (hiwdg->Instance->SR != 0x00u)
{
if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
{
return HAL_TIMEOUT;
}
}
/* If window parameter is different than current value, modify window
register */
if (hiwdg->Instance->WINR != hiwdg->Init.Window)
{
/* Write to IWDG WINR the IWDG_Window value to compare with. In any case,
even if window feature is disabled, Watchdog will be reloaded by writing
windows register */
hiwdg->Instance->WINR = hiwdg->Init.Window;
}
else
{
/* Reload IWDG counter with value defined in the reload register */
__HAL_IWDG_RELOAD_COUNTER(hiwdg);
}
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/** @addtogroup IWDG_Exported_Functions_Group2
* @brief IO operation functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Refresh the IWDG.
@endverbatim
* @{
*/
/**
* @brief Refresh the IWDG.
* @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
* the configuration information for the specified IWDG module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
{
/* Reload IWDG counter with value defined in the reload register */
__HAL_IWDG_RELOAD_COUNTER(hiwdg);
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_IWDG_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

58
firmware/Inc/iwdg.h Normal file
View File

@ -0,0 +1,58 @@
/**
******************************************************************************
* File Name : IWDG.h
* Description : This file provides code for the configuration
* of the IWDG instances.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __iwdg_H
#define __iwdg_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "init.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
extern IWDG_HandleTypeDef hiwdg;
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_IWDG_Init(void);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /*__ iwdg_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2
firmware/Inc/stm32f0xx_hal_conf.h
View File

@ -42,7 +42,7 @@
/*#define HAL_TSC_MODULE_ENABLED */ /*#define HAL_TSC_MODULE_ENABLED */
/*#define HAL_DAC_MODULE_ENABLED */ /*#define HAL_DAC_MODULE_ENABLED */
/*#define HAL_I2S_MODULE_ENABLED */ /*#define HAL_I2S_MODULE_ENABLED */
/*#define HAL_IWDG_MODULE_ENABLED */ #define HAL_IWDG_MODULE_ENABLED
/*#define HAL_LCD_MODULE_ENABLED */ /*#define HAL_LCD_MODULE_ENABLED */
/*#define HAL_LPTIM_MODULE_ENABLED */ /*#define HAL_LPTIM_MODULE_ENABLED */
/*#define HAL_RNG_MODULE_ENABLED */ /*#define HAL_RNG_MODULE_ENABLED */

4
firmware/Makefile
View File

@ -1,5 +1,5 @@
########################################################################################################################## ##########################################################################################################################
# File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Sun Jun 28 13:32:11 CEST 2020] # File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Thu Jul 09 19:18:35 CEST 2020]
# and modified by hand # and modified by hand
########################################################################################################################## ##########################################################################################################################
@ -38,6 +38,7 @@ BUILD_DIR = build
# C sources # C sources
C_SOURCES = \ C_SOURCES = \
Src/init.c \ Src/init.c \
Src/iwdg.c \
Src/gpio.c \ Src/gpio.c \
Src/adc.c \ Src/adc.c \
Src/usb_device.c \ Src/usb_device.c \
@ -65,6 +66,7 @@ Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_adc.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_adc_ex.c \ Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_adc_ex.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \ Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c \ Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim_ex.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c \
Src/system_stm32f0xx.c \ Src/system_stm32f0xx.c \
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \ Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \ Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \

5
firmware/Src/init.c
View File

@ -90,6 +90,7 @@ void init(void)
MX_GPIO_Init(); MX_GPIO_Init();
MX_ADC_Init(); MX_ADC_Init();
MX_USB_DEVICE_Init(); MX_USB_DEVICE_Init();
MX_IWDG_Init();
/* USER CODE BEGIN 2 */ /* USER CODE BEGIN 2 */
/* USER CODE END 2 */ /* USER CODE END 2 */
@ -107,10 +108,12 @@ void SystemClock_Config(void)
/** Initializes the CPU, AHB and APB busses clocks /** Initializes the CPU, AHB and APB busses clocks
*/ */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14|RCC_OSCILLATORTYPE_HSI48; RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14|RCC_OSCILLATORTYPE_HSI48
|RCC_OSCILLATORTYPE_LSI;
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
RCC_OscInitStruct.HSI14State = RCC_HSI14_ON; RCC_OscInitStruct.HSI14State = RCC_HSI14_ON;
RCC_OscInitStruct.HSI14CalibrationValue = 16; RCC_OscInitStruct.HSI14CalibrationValue = 16;
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{ {

48
firmware/Src/iwdg.c Normal file
View File

@ -0,0 +1,48 @@
/**
******************************************************************************
* File Name : IWDG.c
* Description : This file provides code for the configuration
* of the IWDG instances.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "iwdg.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
IWDG_HandleTypeDef hiwdg;
/* IWDG init function */
void MX_IWDG_Init(void)
{
hiwdg.Instance = IWDG;
hiwdg.Init.Prescaler = IWDG_PRESCALER_4;
hiwdg.Init.Window = 4095;
hiwdg.Init.Reload = 4095;
if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
{
Error_Handler();
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/